Assessments - 5, GPA: 4.2
(
)
)
|
Facilidade de uso
Your professional dealer or distributor knows these laws. Please have your certified retailer carry out the connection of your stove. 3. CORRECT OPERATION OF YOUR STOVE Initial startup of your stove Your stove was treated with a special environmentally friendly lacquer. The lacquer surface is still soft when the stove is delivered. The lacquer will harden when your stove is used for the first time. The lacquer surface must not be touched when it is heated for the first time. The stove must be initially heated at a high temperature for at least 1.5 hours. Visible vapors may appear during the hardening of the lacquer. Therefore it will be necessary to open the windows during the initial operation in order let the vapors escape into the outdoors. PLEASE TAKE NOTE: It takes several heating sessions before for your stove releases only the pleasant smell of burning wood. Approved fuels Dry, well cured and natural wood (hardwood preferred), wood briquettes. Maximum amount of fuel Maximum amount of fuel to be added: 1,6 kg wood or appr. 1,8 kg wood briquettes. Larger amounts of fuel can lead to overheating and thus damage the stove. Clean burning The wood must be dry (relative wood moisture < 15%) and untreated. The right amount of wood must be burned in order to ensure a clean fire that releases only small amounts of emissions. Making a fire Prepare everything you need for starting the firesoft wood chips, igniter materials (such as Austroflamm lighter), wood. Figure 1 provides a good overview of the quantity of the materials you will need. Open the primary and secondary air all the way. Move both sliders. See figure 2. Open the stove door. Put ignition aid on the floor of the firebox. Lay soft wood chips onto the paper. Lay one or two logs of wood on the wood chips. Figure 3: Igniting the Fire Light the ignition aid. Close the firebox door. As soon as the chips burn well, close the primary air supply. See Figure 2. Figure 4: Close the Primary Air As soon as the wood logs are burning well too, you can regulate the heating capacity with the secondary air slider. (slider set to the maximum (“AUF”) setting produces maximum heat – see figure 2.) When adding wood to the fire, follow the same procedure as when igniting the fire: Open primary air, open secondary air, carefully open firebox door, lay wood on the fire, close the firebox door. Wait until the added wood catches fire and is burning. Then close the primary air. Subsequently regulate the fire with the secondary air supply. symbol figures Pallas 6 english Heating in between seasons Heating the stove in between seasons, when the outside temperatures are higher, the flue gases may not be able to escape completely and this may lead to disturbances in the chimney draught, especially if the temperatures are rising suddenly. The stove has to be charged with less wood and the primary air has to be increased so that the wood can burn down faster (with visible flames) and thus the chimney flue can stabilize. C...
Este manual também é adequado para os modelos :Lareiras - Gussofen G3 (526.39 kb)
Lareiras - Gussofen G3 (526.39 kb)
Lareiras - Gussofen G3 (526.39 kb)