Assessments - 2, GPA: 4.5
(
)
)
|
Facilidade de uso
If a clear picture with correct colours cannot be obtained, a change to the Colour System may improve the picture. The settings are AUTO, PAL, NTSC4.43 and NTSC3.58. The Australian and New Zealand colour system is PAL. Note: PAL and NTSC3.58 are different colour signal broadcast transmission systems applicable to differing countries. NTSC4.43 is a system used in special VCRs to playback NTSC recorded tapes on a PAL television. Setup menu -Geomagnetic Correction Magnetic interference may come from such things as unshielded motors, moving the TV while it is switched ON, turning off a vacuum cleaner too close to the TV, lightning strikes nearby or many other things. Slight tilting of the picture may be noticeable or coloured patches may sometimes appear at the corners of the screen (colour purity). The Geomagnetic Correction feature can be used to eliminate some interference problems. Quite often simply switching your Television OFF with the Power On/Off Switch (not with the remote control) for 30 minutes and then switching it back ON will cure the problem. Geomagnetic corrections can be made from the remote control or from the TV set. Using the Front Panel 1. Push the button repeatedly to access the Geomagnetic Correction Menu. Geomagnetic correction -, + : Adjust tilt F : To exit STR F -/\/ +//\ TV/AV 2. Push - / \/ or + / /\ to adjust the picture tilt or coloured patches as necessary. Geomagnetic correction - , + : Adjust tiltF : To exit ST R F -/\/ +/ /\ TV/AV 000 The adjustment range is from -8 to +8. 3. Push the F button to return to normal viewing. Using the Remote Control 1. Push the SET UP button . 2. Select the Geomagnetic Correction Menu by Pushing or . 3. Push or to access the Geomagnetic Correction. Geomagnetic correction 4. Push or to adjust the picture tilt or coloured patches as necessary. 000 The adjustment range is from -16 to +16. 5. Push the SET UP button to return the TV to the Set Up Menu. OR 6. Push the TV/AV button to return to normal viewing. Helpful Hint 1. If geomagnetic changes cause colour patches on the screen switch your Television OFF with the Power On/Off Switch (not with the remote control) for 30 minutes and then switch it back ON. 2. Adjustment for geomagnetic should be performed every time the location of the TV is changed. 3. In some cases colour patches will not be completely eliminated even after adjustment, particularly in ferroconcrete buildings and other structures susceptible to geomagnetic effects. In these cases the TV location will have to be changed. 20 Setup menu - Owner ID Owner ID allows you to enter a security code and address information so that in the unfortunate event of theft it will help the Police to determine the owner. Press the SETUP Button . Move to Owner ID Option or buttons. Access the Owner ID or buttons If the Owner ID has previously been set, enter your PIN followed by ‘STR’ to proceed, this will take you to the NAME option. If your Owner ID has not been set you can enter a PIN (using 0 to 9 on the remote control) or the Up / Down buttons. You will be taken automatically to the NAME line. If not, move to the NAME line. Enter your name. Use the left and right buttons to move from character to character. Use the Up and Down buttons to change the character. Move to HOUSE NO. Enter your House Number (or other identification). Use the left and right buttons to move from character to character. Use the Up and Down buttons to change the character. Move to POSTCODE. Enter your Postcode. Use the left and right buttons to move from character to character. Use the Up and Down buttons to change the character. Press STR to store your details. You will be asked “Are you sure?” Press STR to confirm the details. Change character Select character Exit Return ‘STR’ Button - Store Owner ID TV/AV Change character Select character Exit Return ‘STR’ Button - Enter PIN Number TV/AV Owner ID PIN NUMBER: 1 1 1 1 NAME: POSTCODE: HOUSE NO: P A N A S O N I C * * * * * P E N R I T H * * * * * * * * * * * * * * * This is the message you will see if you have already set your ID details. This is the message you will see if you have not already set your ID details. Note: Pushing the button at any time will return you to normal viewing without saving any of the changes you have made. Aspect control This button is used to move through the different aspect ratios. The aspect options are Auto, 16:9, 14:9, JUST, 4:3, Zoom1, Zoom2 and Zoom3. Auto This option determines the best aspect ratio to use to fill your screen. If Auto detects a widescreen signal it switches into the appropriate 16:9 or 14:9 widescreen mode. 16:9 This option will display a true 16:9 (anamorphic) picture with no aspect distortion. 14:9 This option will display a 14:9 letterbox or 4:3 picture with no aspect distortion. JUST This option gives you a “best fit” option when showing 4:3 on wide screen. The centre of the picture is not affected but there is some stretching at the edges. 4.3 This option will display a...
Este manual também é adequado para os modelos :Lareiras - QUINTRIX TX-76PW300A (862.39 kb)