Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
The use of any part that is NOT factory authorized can be dangerous and will void your warranty. Contact 1.800.762.1142. 42. Deaths, serious injury or damage to property may occur if the above is not followed exactly. SAFETY INFORMATION – CONTINUED PACKAGE CONTENTS Part Description Qty Reorder # 1 Spark Guard 1 55-05-521 2 Knob 3 55-05-523 3 Table Insert 1 55-05-522 4 Wood Grate 1 55-05-524 5 Bottom Bowl 1 55-05-503 6 Hearth Corner 4 55-05-510 7 Side Panel 6 55-05-519 8 Side Panel Support 3 55-05-520 9 Hearth 4 55-05-508 10 Hearth Bracket 4 55-05-509 11 Rear Leg 2 55-05-513 12 Door 2 55-05-504 13 Right Front Leg 1 55-05-514 14 Door Support 1 55-05-506 15 Left Front Leg 1 55-05-511 16 Door Frame Support 2 55-05-505 17 Base Panel 4 55-05-501 18 Cover (not shown) 1 55-05-738 19 Poker (not shown) 1 55-05-739 A Screw M4x8 Black Nickel Plated 8 55-05-517 B Screw M4x16 Black Nickel Plated 1 55-05-515 C Screw M4x25 Black Nickel Plated 2 55-05-516 D Screw M5x10 Black Nickel Plated 74 55-05-518 E Bolt M5x10 Black Nickel Plated 4 55-05-502 F Allen Wrench M5 1 55-05-500 1 2 3 4 5 11 6 7 8 7 7 9 9 7 8 6 10 6 9 9 7 12 13 11 6 7 14 12 8 2 15 16 17 A B C D E F PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service for replacement parts. Estimated Assembly Time: 45 minutes Tools Required for Assembly: Allen Wrench (included) Helpful Tools: Phillips Screwdriver (not included) ASSEMBLY INSTRUCTIONS 1. Attach hearth corners using 16 screws “D”. Figure 1 2. Attach hearth brackets using 8 screws “D”. Figure 2 3. Attach side panels, side panel support, left front leg, and left rear leg, using 7 screws “D” and 2 bolts “E”. Figure 3 4. Attach side panels, side panel support, and right rear leg, using 7 screws “D” and 1 bolt “E”. Figure 4 5. Attach side panels, side panel support, and right front leg, using 7 screws “D” and 1 bolts “E”. Figure 5 6. Attach door frame supports and door support using 5 screws “D”. Figure 6 ASSEMBLY INSTRUCTIONS –CONTINUED Figure 6a Figure 6b Figure 6c 7. Attach base panel using 8 screws “D”. Figure 7 8. Attach base panel assembly using 16 screws “D”. Figure 8 9. Attach doors and knobs using 8 screws “A” and 2 screws “C”. Figure 9 ASSEMBLY INSTRUCTIONS –CONTINUED 10. Insert bottom bowl, wood grate and spark guard. Figure 10 11. Attach knob using screw “B” to table insert. Note: When table insert is not being used, store in a cool dry place where it will not be damaged. Figure 11 When using table insert, remove spark guard and place table insert onto bottom bowl. Note: When spark guard is not being used, store in a cool dry place where it will not be damaged. WARNING: Do NOT place table insert onto the bottom bowl until fire is completely out and the fireplace is cool. WARNING: Do NOT place a hot spark guard or hot fireplace tools onto combustible surfaces such as grass, wooden deck or furniture. Figure 12 ASSEMBLY INSTRUCTIONS –CONTINUED OPERATING INSTRUCTIONS WARNING: Before using this outdoor fireplace, make sure you have read, understand and are following all information provided in the Important Safeguards presented on page 3 and 4. Failure to follow those instructions can cause death, serious injury or property damage. Lighting 1. Make sure there is only a small amount of ash in the bottom of the bowl. 2. Place a layer of dry kindling or a natural firestarter such as Fatwood™ onto the center of the grate. 3. Place above that a layer of dry seasoned hardwood that is cut to lengths no more than 3/4 the diameter of the bowl. 4. Use a match to light kindling or firestarter. 5. Using the poker provided and heat-resistant gloves, replace spark guard once the kindling or firestarter is lit. The poker provided may become hot during use and may remain hot after use. Tending the Fire You may need to shift and/or add logs for an ideal experience. Do NOT place a hot spark guard or hot fireplace tools onto combustible surfaces such as grass, wooden deck or furniture. The poker provided may become hot during use and may remain hot after use. Do NOT leave hot spark guard, poker, or other hot fireplace tools unattended, especially around children and pets. 1. Using the poker provided and heat-resistant gloves, carefully remove spark guard. 2. While using the poker provided and heat-resistant gloves, shift coals and logs to allow additional airflow. 3. Do NOT add gasoline, kerosene, diesel fuel, lighter fluid or alcohol to relight or enhance an existing fire. 4. Wait until glowing coals have developed before adding any additional wood. If additional wood is required, place wood on top coals. Be careful not to shift ashes. 5. Using the poker provided and heat-resistant gloves, replace spark guard. Extinguishing 1. Allow fire to burn itself out. 2. Do NOT use water to extinguish as this is dangerous and can cause...