Assessments - 4, GPA: 3.8
(
)
)
|
Facilidade de uso
32. Do NOT place wood directly into bottom of the outdoor fireplace. Place wood only on the wood grid. 33. Do NOT overload the fireplace. Do not add additional firewood until the fire burns down. NOTICE: If any portion of the bowl, lid or spark guards of this outdoor fireplace are glowing red it is overloaded. 34. Do NOT lean over this outdoor fireplace when lighting or when in use. 35. Do NOT place a hot spark guard or hot fireplace tools onto combustible surfaces such as grass, wooden deck or furniture. 36. Avoid breathing smoke from the fire and avoid getting it into your eyes. 37. This outdoor fireplace should be thoroughly inspected and cleaned on a regular basis. 38. After a period of storage and/or non-use, check for signs of damage and creosote build-up. Do NOT operate until necessary repairs and/or cleanup are executed. 39. Do NOT use pressure washer to clean. 40. Do NOT move this outdoor fireplace by picking it up by the stone hearth, the top layer of stones. 41. Use only Blue Rhino Global Sourcing, LLC factory authorized parts. The use of any part that is NOT factory authorized can be dangerous and will void your warranty. 42. Deaths, serious injury or damage to property may occur if the above is not followed exactly. page no. Assembly Instructions DO NOT RETURN PRODUCT TO STORE. For assistance call 1.800.762.1142 toll free. Please have your owner’s manual and serial number available for reference. For Easiest Assembly: • To avoid losing any small components or hardware, assemble your product on a hard level surface that does not have cracks or openings. • Clear an area large enough to layout all components and hardware. • When applicable, tighten all hardware connections by hand first. Once the step is completed, go back and fully tighten all hardware. • Follow all steps in order to properly assemble your product. Step 3 Assemble spark guard Attach handle to spark guard using 2 sets of screws (A) and small lock washers (C). Step 1 Assemble base A. Attach legs to ceramic tabletop using 8 sets of cap nuts (B) and large lock washers (D). Note: Do not fully tighten. B. Attach leg connector ring to legs using 4 sets of cap nuts (B) and large lock washers (D). Note: Fully tighten all connections. Step 4 Insert grate and spark guard Step 2 Insert bowl Insert bowl key slots onto pegs on base. Turn left to secure into place. Step 5 Completed Congratulations your assembly is now complete. Read Operating Instructions before proceeding. Operating Instructions WARNING FOR YOUR SAFETY Before using this outdoor fireplace, make sure you have read, understand and are following all information provided in the Important Safeguards presented on page 2. Failure to follow those instructions can cause death, serious injury or property damage. Lighting 1. Make sure there is only a small amount of ash in the bottom of the bowl. 2. Place a layer of dry kindling or a natural firestarter such as Fatwood™ onto the center of the grate. 3. Place above that a layer of dry seasoned hardwood that is cut to lengths no more than 3/4 the diameter of the bowl. 4. Use a match to light kindling or firestarter. 5. Replace spark arrestor once the kindling or firestarter is lit. Tending the Fire You may need to shift and/or add logs for an ideal experience. Reminders: • Always wear protective gloves or a pot holder when tending a fire. • Wait until glowing coals have developed before adding any additional wood. • Do NOT add gasoline, kerosene, diesel fuel, lighter fluid or alcohol to relight or enhance an existing fire. 1. Carefully remove spark arrestor. 2. While using a long handled fireplace tool, shift coals and logs to allow additional airflow. 3. If additional wood is required, place wood on top coals. Be careful not to shift ashes. 4. Replace spark arrestor. Extinguishing 1. Allow fire to burn itself out. 2. Do NOT use water to extinguish as this is dangerous and can cause damage to this outdoor fireplace. Cleaning & Care Inspecting This outdoor fireplace should be inspected on a regular basis to ensure product safety and longer product life. Do NOT attempt to inspect this outdoor fireplace until the fire is COMPLETELY out. Do NOT move this outdoor fireplace by picking it up by the stone hearth, the top layer of stones. 1. Check handles to make sure they are secure. 2. Check components for any signs of damage or rust. 3. If damage to any component is detected, do NOT operate until repairs are executed. Cleaning This outdoor fireplace should be cleaned on a regular basis to promote safer experiences and longer product life. Note: After repeated use, a slight discoloration of the finish may occur. Do NOT attempt to clean this outdoor fireplace until the fire is COMPLETELY out. Do NOT move this outdoor fireplace by picking it up by the stone hearth, the top layer of stones. Do NOT use oven cleaner or abrasive cleaners as they will damage this product. Do NOT clean any part of this outdoor fireplace in a self cleaning oven as it may d...