Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
The heater goes out • If it goes out on completing the ignition instructions, repeat the operation, following the instructions faithfully. • If it goes out after 30 minutes, it is signalling that it is operating in a stuffy atmosphere. Ventilate the room and reignite the heater. • If it goes out before 30 minutes of operation, ensure that it is not exposed to air currents or that the bottle has not run out of gas. Connection of the apparatus The apparatus can be connected to the gas bottle by the user without recourse to a fitter/ technician. In order to do so you should have at hand the required accessories. Required accessories: (Fig 1 & 2). In order to work the heater must have: - 1 gas bottle of butane or propane and bottled only by Official Distributors - 1 standardised specifications pressure regulator. See Fig 2. - 1 flexible tube with a length of 0.5 m. - 2 screwed collar-clips for the flexible tube (Fig 1) In order to identify these elements, consult the specifications plaque and contact your gas distributor. WORKING DESCRIPTION Depending on the model, your heater may be fitted with the following: 1.- Operating mode and lighting-up control buttons. Heat intensity selection. 2.- Protection grille 3.- Infrared burner 4.- Pilot light window 5.- Catalytic panel 6.- Removable back panel. Fig. 4 7.- Fitting lugs for back panel 8.- Gas feed coupling 9.- Wheels for transport APPARATUS START-UP • Once the heater has been taken out of its packaging. • Remove the back panel from inside the apparatus • Connect the flexible tube to the gas inlet coupling of the heater and to the regulator, ensuring a gastight fit with the collar clips well screwed down • Place the gas bottle on the base and fit the regulator to the bottle. On opening the regulator, check that there are no gas leaks by applying soapy water with a paintbrush at the union of the flexible tube with the heater and with the regulator. • Fit the back panel using the attached fixing lugs. Fig 1. Note: Changing of the bottle should be carried out in a non- flammable environment. The heater incorporates a safety device which extinguishes the pilot flame if the ventilation in the premises is insufficient. It is usual for this device to operate in very small premises and if the flame does go out, ventilate the room well and wait a few minutes before reigniting the heater. IGNITION INSTRUCTIONS • Attention: before using the apparatus for the first time and after long periods of non-use, we recommend switching on the control buttons several times alternately and without gas flow in order to facilitate working. • Open the gas outlet by changing the position of the upper lever on the regulator. Fig 2. ENGLISH IMPORTANT ADVICE • Read the instructions in this manual carefully. It has important information both for operational use and for your safety • Do not start up faulty apparatus • Maintenance and repairs should be carried out by a qualified technician. If these instructions are not abided by, the...
Este manual também é adequado para os modelos :Lareiras - CT2803/02 (308.94 kb)
Lareiras - CT2803/03 (308.94 kb)
Lareiras - CT2803/04 (308.94 kb)
Lareiras - CT2803/11 (308.94 kb)