Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
ON light 5. Pause-and-Serve drip system 6. Glass carafe 7. Nonstick warming plate 8. Digital programmable clock 9. Minute button 10. PROGRAM button 11. AUTO light 12. Water reservoir 4 USK CM 25282 -080331 BEFORE FIRST USE • When you use your appliance for the first time, pour fresh water into the water tank (without coffee) and switch on the appliance. • Once all the water has passed through, switch off the appliance and let it cool down. When it is cold enough repeat the process 3 times with fresh water. SETTING THE CLOCK To set the digital clock, press the PROGRAM button and then press the HOUR button until the clock displays the desired hour. Press the MIN button until the clock displays the desired number of minutes. PREPARATION OF COFFEE • Open the lid of the water tank and pour the desired volume of water in it. The water level can be read off the water level indicator. Never exceed the maximum level indicated. • Insert filter paper in the filter holder and add the desired quantity of ground coffee using the provided scoop. • Never forget to close the water tank lid before switching on the coffee maker. • Put the jug with closed lid on the hotplate. • Plug in the coffee maker. Press the START/STOP button once. The red ON light, will be illuminated, indicating that your appliance is in use. Thanks to the keep warm function, your coffee stays warm as long as the appliance is switched on. Note that the appliance will be switched on as long as you do not switch it off manually. We advise you not to let the appliance switched on for more than 2 hours and make sure that you never let an empty jug on the appliance. • Your coffee maker is equipped with a “Pause-and-Serve” function, which means that when you remove the jug from the appliance, a non-drip valve will automatically operate to stop any drops of coffee falling onto the hotplate. When you put the jug back into place, the non-drip valve opens automatically and allows remaining coffee to filter through into the jug. 5 USK CM 25282 -080331 • Wait until the brewing process is finished and the filter is empty before removing the jug. • Practical hints: When the water tank is empty, wait a few more minutes, as some water might still drip out of the filter before removing the jug. PROGRAMMING THE COFFEE MAKER To program your coffee maker to brew fresh coffee at a preset time, first follow steps 1 to 4 in the “PREPARATION OF COFFEE” section. Make sure the coffee maker’s clock is set to the right time. Press the PROGRAM button twice. The clock will now display 12:00 with the word “TIMER” in the upper left corner. Use te HOUR and MINUTE buttons to set the desired brew time. Press the START/STOP button twice to activate the preset brew cycle. The green AUTO light will illuminate when the brew time is properly set. When your preset brew time is reached and the coffee maker starts its brew cycle, the green AUTO light will go out and the red ON light will illuminate. As with the regular brew cycle, an automatic two hour keepwarm cycle will commence after your coffee maker has finished brewing. At the end of the two hours, the coffee maker will automatically shut itself off. 6 USK CM 25282 -080331 DESCALING AND CLEANING • Removing limescale from your coffee maker prolongs its life span. For decalcification only use products especially made for descaling of coffee makers and follow their instruction manual carefully. • Never put any part of the appliance in the dishwasher. Clean the jug with soapy water and rinse it with clear water. • To clean the plastic parts of the appliance, use a humid, non abrasive cloth. PRACTICAL HINTS When you notice that the coffee making process is longer than it should be it is probably time to decalcify the appliance. Do not wait for the situation to get worse. The decalcifying frequency depends on the amount of lime in water and therefore can be different from a household to another. Therefore it is important to pay attention to this. A good maintenance of your appliance will prolong its lifespan. Guarantee claims will not be accepted for the replacement of a heating element full of scale. 7 USK CM 25282 -080331 WARRANTY We suggest that you complete and return the enclosed Product Registration Card promptly to facilitate verification of the date of original purchase. However, return of the Product Registration Card is not a condition of these warranties. You can also fill this warranty card online, at the following address: This KALORIK product is warranted for 1 year from the date of purchase against defects in material and workmanship. This warranty is not transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty performance. During this period, the KALORIK product that, upon inspection by KALORIK, is proved defective, will be repaired or replaced, at KALORIK's option, without charge to the customer. If a replacement product is sent, it will carry the remaining warranty of the o...