Assessments - 1, GPA: 4
(
)
)
|
Facilidade de uso
Turn the selector switch of the Professional Cappuccino Frother (15) to the milk foam position (Fig. 19). READY Open the steam / hot water draw-off tap (14) (Fig. 12). The milk foam is prepared. The illuminated ring (2) is active. STEAM You can adjust the steam draw-off time individually by turning the Rotary Switch (1) until the required SEC are displayed. For example, 35 SEC If you do not change the steam draw-off time settings using the Rotary Switch (1), the machine will use the settings last adjusted. Adjust the steam dispensing time to suit the size of your cup. During the steam draw-off operation, the message STEAM is displayed. When the steam quantity is reached, the message CLOSE TAP is displayed. Close the steam / hot water draw-off tap (14). READY Due to the system design, steam can still escape and some milk may continue to drip before the TAP is closed. At any time, you can abort steam dispensing early, by closing the tap for dispensing steam/hot water (14). Now, move your cup with the milk foam and place it under the coffee spout and dispense the required coffee product. (Fig. 8). Your Cappuccino is ready. 13.1 Dispensing Hot Milk with the Professional Cappuccino Frother Turn the selector switch of the Professional Cappuccino Frother (15) to the milk range (Fig. 21). The procedure for dispensing hot milk is the same as the procedure for dispensing milk foam for Cappuccino (Chapter 13). 13.2 Cleaning of the Professional Cappuccino Frother To ensure that the Professional Cappuccino Frother functions perfectly, you should rinse it with water each time after pre paring milk. You will not be prompted by your IMPRESSA to rinse the Professional Cappuccino Frother. 13.3 Rinsing the Professional Cappuccino Frother Carefully pull off the Professional Cappuccino Frother from your IMPRESSA. Dismantle the Professional Cappuccino Frother (15) into its indi vidual parts (Fig. 16). Thoroughly rinse all parts of the nozzle under running water. Reassemble the Professional Cappuccino Frother (15) and refit it on to your IMPRESSA. 13.4 Cleaning the Professional Cappuccino Frother To ensure that the Professional Cappuccino Frother (15) functions perfectly, you should clean it daily if you have prepared milk foam or hot milk. You will not be prompted by your IMPRESSA to clean the Professional Cappuccino Frother (15). You can obtain the JURA Auto-Cappuccino Cleaner from the specialist shop. Place a receptacle under the Professional Cappuccino Frother (15) (Fig. 9). Fill a second receptacle with 2.5 dl of fresh water and add one capful of the Auto-Cappuccino Cleaner. Dip the milk pipe into the second receptacle with the Auto- Cappuccino Cleaner (Fig. 9). Turn the selector switch of the Professional Cappuccino Frother (15) to the milk position (Fig. 21) or to the milk foam position (Fig. 19). READY Open the steam / hot water draw-off tap (14) (Fig. 12). Draw steam until the receptacle with the Auto-Cappuccino Cleaner is empty. This procedure cleans the Professional Cappuccino Frother and the milk pipe. Close the steam / hot water draw-off tap (14). READY Before CLOSE TAP water may still escape the system. Fill the receptacle with 2.5 dl of fresh water. Dip the milk pipe into the receptacle with the fresh water. Open the tap for dispensing steam/hot water (14) (Fig. 12) in order to draw steam. Draw steam until the receptacle with the fresh water is empty. This procedure rinses the Professional Cappuccino Frother (15) and the milk pipe with fresh water. Cleaning of the Professional Cappuccino Frother (15) is now complete, your IMPRESSA is ready for use. 14. Switching off the IMPRESSA In order to ensure perfect operation, please don’t switch off your IMPRESSA at the power switch (24) before all the symbols (3). on the display (9) have gone off except for READY Switch off the IMPRESSA using the ON/OFF key RINSING (3). An automatic rinsing operation is started. Your IMPRESSA is in standby mode. 17 E 15. Programming When your IMPRESSA leaves the factory it is adjusted such that you can draw off coffee without having to change any settings. However, you can programme various para meters individually. You can programme the following stages: Filter Water hardness Maintenance Aroma Temperature Time Automatic switch-on time Automatic switch-off time Draw-offs Language Display Exit To start programming, press the Rotary Switch (1) until FILTER –/ appears Rotary switch Turn the Rotary Switch to change the adjusted values or to select the next programming step. Press the Rotary Switch to check the values adjusted or to save the values selected (Fig. 17). 15.1 Programming the filter Refer to Chapter 5.1 ‘Inserting the filter’. 15.2 Programming the water hardness Refer to Chapter 4 ‘Adjusting the water hardness’. 15.3 Maintenance menu READY Press the Rotary Switch (1) until FILTER –/ appears The illuminated ring (2) is active. Turn the Rotary Switch (1) until MAINTENANCE appears Press the Rota...
Este manual também é adequado para os modelos :Cafeteiras - F70 (358.07 kb)