Assessments - 5, GPA: 4
(
)
)
|
Facilidade de uso
The symbol flashes. Draw off water until the symbol lights up. Now turn the selector switch for hot water/steam (12) back to the position . When the symbol lights up, press the maintenance key (4). Your machine rinses and is ready for drawing off coffee. 11.9 General cleaning instructions Never use abrasive articles or corrosive chemicals to clean your machine. Wipe down the casing on the inside and out using a soft, damp cloth. Clean the pivoting nozzle for hot water/steam after each use. After heating milk, draw off a little hot water in order to clean the inside of the pivoting nozzle. You can take off the frothing aid for a thorough cleaning (Fig. 8). The water tank should be rinsed out and filled with clean water every day. If there is scale visible in the water tank, you can remove it with a customary de-scaling agent. Remove the water tank from the machine for this purpose. 11.10 Regular service Regular inspections by Jura Service extend the service life and reliability. Keep the original packaging as transport protection. 13 E 11.11 Empty system This procedure is necessary in order to protect the machine from damage by frost in transport. Switch the machine OFF with the ON/OFF switch. Place a vessel under the pivoting nozzle for hot water/steam (13). Turn the selector switch for hot water/steam (12) to position . Switch your machine back on again with the ON/OFF switch. The symbol lights up. Press the maintenance key until the symbol flashes. . Draw steam off until the flow of steam is automatically interrupted and the symbol lights up on the display. After this, turn the selector switch for hot water/steam (12) back to the position. 12. Cleaning The machine has an integrated cleaning programme. If the machine needs cleaning, the symbol flashes. You can continue to draw off coffee or hot water/steam and run the cleaning programme later. Only use Jura cleaning tablets. They are available from your Jura dealer. You must not interrupt the cleaning programme once it has started. Switch your machine on with the ON/OFF key. Press the maintenance key (4) for about 3 seconds. The (only when necessary), , symbols light up. Fill the water tank. Empty the drip tray and the grounds container and put both of them back in again. The (only when necessary), symbols go off and the symbol appears. Please a vessel under the coffee spout (9) and press the maintenance key (4). The symbol goes off. The symbol lights up to inform you that the cleaning process has been activated. If the symbol lights up, empty the drip tray (if necessary) and put it back in again. The symbol goes off and the , , symbols light up. Now put a Jura cleaning tablet into the filler funnel for powder coffee (10) (Fig. 9). Press the maintenance key (4). The , symbols go off. The cleaning process is continued. This is displayed by the symbol lighting up. If the symbol lights up again, empty the drip tray (if necessary), wait for about 10 seconds before putting it back in again. The symbol goes off and the , symbols light up. Place a vessel under the coffee spout (9) again and press the maintenance key (4). The cleaning process is continued. This is displayed by the symbol lighting up. As soon as it has been completed, the symbol lights up. Empty the drip tray and the grounds container and put both of them back in. The symbol lights up. After each cleaning operation the filler funnel for the 2nd coffee type should be cleaned. 13. Descalcifying The machine has an integrated de-scaling programme. If you use a Claris filter cartridge, your machine does not need de-scaling. Only use Jura cleaning tablets. They are available from your Jura dealer. If the machine needs de-scaling, the symbol flashes. You can continue to draw off coffee and hot water/steam and then run the de-scaling programme later. Only run the de-scaling programme when the machine has been switched off for at least 2 hours and has cooled down well. The de-scaling programme is started with the machine switched off. Once it has started, the de-scaling programme must not be interrupted. Switch your machine off with the ON/OFF switch and leave it to cool down for 2 hours. Remove the water tank and empty it. Press the maintenance key (4) for about 3 seconds. The , symbols light up. Empty the drip tray and the grounds container and put both of them back in again. The symbol goes off and the , symbols light up. Completely dissolve the contents of one blister (2 tablets) in 0.5 litres of water in a vessel and pour the mixture into the water tank. Put the tank back in again. The symbol appear. Turn the selector switch for hot water/steam (12) to the position . The symbol go off and the , symbols light up. Place a sufficiently large vessel under the pivoting nozzle for hot water/steam (13) and press the maintenance key (4). The lighting of the symbol and the flashing of the symbol show you that the de-scaling process has been activated. If the symbol lights up,...
Este manual também é adequado para os modelos :Cafeteiras - IMPRESSA E40 (459.87 kb)
Cafeteiras - IMPRESSA E60 (459.87 kb)