Assessments - 2, GPA: 4 ( )

Fabricante : Cuisinart Arquivo Tamanho: 697.03 kb Arquivo Nome : Língua de Ensino:

Since the flavor extraction rate varies during the brew cycle, we recommend allowing the brewing cycle to finish before pouring the coffee. 8 12 14. Thermal Carafe with Hands-free Lid The easy-pour, no-drip double-wall insulated 10-cup stainless steel thermal carafe with an ergonomic handle. 15. Resting Plate Scratch resistant with black, nonstick coating. 16. Ready Tone (not shown) Signals the end of the brew cycle with five beeps. 17. Cord Storage (not shown) 18. Power Loss Back-up System (not shown) One-minute protection in case power fails, breaker trips, or unit is unplugged. 19. Measuring Scoop (not shown) Cuisinart t2 7 9 10 11 13 14 15 5 CONTROL PANEL Cuisinart 1. Clock Display Displays time of day and auto on time. 2. Function Knob For setting time of day, and auto on time. a. Auto On The Auto On feature is used to program the start time of the brew cycle. The auto on time can be set for any time, day or night. The PM indicator is displayed on the LCD for nighttime program times. b. Program Set The Program Set function is used to set the time for the Auto On function. c. Brew The Brew function is used to start the brew cycle directly. d. Clock Set Used to program the time of day. e. Audible Tone (not shown) The Cuisinart® Thermal 10-Cup Programmable Coffeemaker is equipped with an audible tone which will sound 5 times when the coffee has completed brewing (coffee will continue to stream from the filter for a few seconds after tone). 3. On/Off Button Used to turn your coffeemaker on and off; also works in tandem with the function knob. 4. Hour and Minute Buttons For use in setting hour and minute for time of day, and auto on time. 5. On/Off and Auto On Indicator Lights 6. Clean Setting Used to indicate time to clean your coffeemaker to remove calcium buildup. 7. 1-4 Cup Setting For brewing smaller pots of coffee -it provides double heating of the water, so coffee is piping hot. 6 PROGRAMMING YOUR COFFEEMAKER TO BREW COFFEE 1. Turn the function knob to “Brew.” 2. Press the On/Off button and release. The red On indicator light will illuminate and brew cycle will begin. TO TURN THE COFFEEMAKER OFF Press the On/Off button and release. Note: This coffeemaker shuts off automatically after brewing is complete. PROGRAMMING YOUR COFFEEMAKER FOR DELAYED BREW TIME To set the time: 1. Turn the function knob to “Clock.” a. Set Hour: Press and hold the Hour button to scroll through numbers quickly. When number displayed approaches the desired setting, press and release (pulse) the button to advance one digit at a time. After setting the correct hour, the default will be the last time set unless power is shut off. NOTE: When the number count passes 12, the PM light will be displayed on the LCD. b. Set Minutes: Press and hold the Minute button to scroll through numbers quickly. When number displayed approaches the desired setting, press and release (pulse) the button to advance one digit at a time. After setting the correct minute, the default will be the last time set unless power is shut off. To finish setting time, turn the Function Knob to any other setting or simply wait until the numbers stop blinking. To program the Auto On (brew start time) 1. Turn the function knob to “Prog.” 2. Set the time you want coffee to begin brewing by using the minute and hour push-buttons. Follow the same instructions you used to set the time of day, in the To set the time section above. 3. Turn the function knob to “Auto On.” LCD will display the current time. 4. Press the On/Off button and release. The green indicator light will come on to remind you that the programming function is in use. At the programmed time, the red indicator will come on as well, indicating that the brew cycle is starting. Both lights will go off when keep warm cycle ends. NOTE: To reactivate the auto-on feature to start brew cycle at the same time another day, simply press the On/Off button and release. The green Auto-On light will illuminate. 1 - 4 Cup Setting The 1- 4 cup setting button is used when you make small amounts of coffee. The 1-4 cup setting basically double heats the water, making your smaller amount piping hot. To use: When making a smaller amount, press the 1-4 button on the control panel after turning on the unit. Power Loss Back-up One-minute protection in case a breaker trips, the unit is unplugged, or the power fails. It holds all programmed information, including time of day, auto on time and auto off time. MAKING COFFEE Before you make the first pot of coffee in your new Cuisinart® coffeemaker, we recommend operating the coffeemaker once using only water and a paper filter. This will remove any dust or residues that remain in the system from the manufacturing process. 1. Insert the Water Filter a. Remove the filter from polybag and soak in cold tap water for 15 minutes. b. Remove the water filter holder from the coffeemaker by lifting it out of the res...

Baixe o seu

Para fazer o download, introduza 2 dígitos :