Assessments - 0, GPA: 0 ( )

Fabricante : Philips Arquivo Tamanho: 2.72 mb Arquivo Nome : Língua de Ensino:

Red • Only after adding the descaling solution in the tank, press the “ ” button to confi rm the activation of the descaling cycle. • 19 • English Red • Turn the selector switch clockwise to the “ ” position to start dispensing the descaling solution. Red • The machine carries out a quick dispensing cycle of the descaling solution through the steam wand. Red • When the machine stops the dispensing through the steam wand, turn the selector switch back to the “ ” position. Red • The descaling solution is dispensed inside the machine and collected into the drip tray. Red • Once this second dispensing is complete, turn the selector switch clockwise to the “ ”position to continue the descaling cycle through the steam wand. Red Red • When the solution in the tank is fi nished, the icon on the side is displayed to indicate that the selector switch must be brought back to the “ ” position. • The dispensing of the descaling solution at regular intervals is managed automatically by the machine (the bar shows the cycle progress). Red • The icon indicates that the tank must be rinsed and fi lled. Rinse the water tank thoroughly and fi ll it again with fresh drinking water up to the MAX level. • Empty the container used to collect the liquid dispensed by the machine and place it back under the steam wand. Red • When inserting the tank filled with water in the machine, the icon on the side is displayed; turn the selector switch clockwise to the “ ” position. Red • The machine starts the rinse cycle. In this phase the whole water tank content is dispensed through the steam wand. Red • When the water in the tank is fi nished, the icon on the side is displayed to indicate that the selector switch must be brought back to the “ ” position. • 20 • Red • The icon indicates that the tank must be rinsed and fi lled. Rinse the water tank thoroughly and fi ll it again with fresh drinking water up to the MAX level. • Empty the container used to collect the liquid dispensed by the machine and place it back under the steam wand. • At the end, place the container under the dispensing spout. Red • Turn the selector switch back to the “ ” position. Red • The machine now carries out the rinse cycle of the descaling solution through the dispensing spout. Wait until the end of the dispensing cycle. Red • After inserting the water tank in the machine, turn the selector switch clockwise to the “ ” position. The machine begins dispensing a small quantity of water through the steam wand. Wait until the end of the dispensing cycle. Red • After placing the container, turn the selector switch clockwise to the “ ” position to stop the rinse cycle through the steam wand. • At the end, place a container under the steam wand. Use a container of at least 1 litre capacity. If you do not have a container of this capacity, once it is fi lled close the knob, empty the container and then place it again under the wand and repeat the procedure. Red Red • The icon indicates that the tank must be rinsed and fi lled. Rinse the water tank thoroughly and fi ll it again with fresh drinking water up to the MAX level. • Remove and empty the containers used to collect the rinsing water. • When inserting the water tank again in the machine, the icon on the side is displayed. Press the “ “ button to exit the descaling cycle. Red • At the end of the second rinse cycle, turn the selector switch back to the “ ” position. • 21 • English The descaling cycle is complete and the machine can be used to brew products. Note: At the end of the descaling cycle the “Intenza” fi lter, that was removed from the water tank at the beginning of the cycle, can be installed again. After installing the filter, before brewing coffee, dispense a cup of water using the hot water function (see section “Hot Water Dispensing”). If a new “Intenza” fi lter is installed perform the procedure described in the section “INTENZA Water Filter”. • Turn the selector switch back to the “ ” position. • The machine needs the priming of the water circuit. Turn the selector switch clockwise to the “ ” position until the priming Red cycle is complete. Red • The machine now carries out the warm-up and rinse cycle to prepare for product brewing. • Remove the descaling liquids from the drip tray. The descaling solution must be disposed of according to the manufacturer’s instructions and/or regulations in force in the country of use. After completing the descaling cycle, wash the brew group as described in the “Brew Group” section in the “Cleaning and Maintenance” section. Reassemble the external part of the Pannarello. Black Orange Black Orange PROGRAMMING The user can change some of the machine operating parameters to suit his/ her needs. Enter the “menu” The programming menu can only be accessed when the machine is in “stand-by” mode. To change the machine status to stand-by mode, press the ON/OFF button. When the machine is in stand-by mode, press the “ “button to access pro gramming. The first page that is disp...

Baixe o seu

Para fazer o download, introduza 2 dígitos :