Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
Cleaning Before cleaning the machine, the main power button (5) must be switched to the -0- position and the plug must be removed from the socket. Then wait for the machine to cool down. Never immerse the machine in water! It is strictly forbidden to tamper with the inside of the machine. Space for use and maintenance To ensure that the coffee machine works properly and efficiently, the following conditions are recommended: • Choose a level surface; • Select a location that is sufficiently well-lit, clean and near an easily reachable socket; • Allow for a minimum distance from the sides of the machine as shown in the figure. Storing the machine If the machine is to remain out of use for a long time, turn it off and unplug it. Store it in a dry place out of children’s reach. Keep it protected from dust and dirt. Servicing / Maintenance In case of failure, faults or a suspected fault after dropping, immediately remove the plug from the socket. Never attempt to operate a faulty machine. Servicing and repairs may only be carried out by Authorized Service Centres.Repairs must only be carried out by an Authorised Service Centre. All liability for damages caused by works not carried out in a professional manner is declined. English 10 SAFETY REGULATIONS - INSTALLATION Fire safety In case of fire, use Carbon Dioxide extinguishers (CO2). Do not use water or dry-powder extinguishers. Key to machine components Coffee bean hopper Coffee bean hopper cover Grinder adjustment knob Coffee dose adjustment knob Main power button (ON/OFF) Water tank cover Water tank Grounds drawer Power cable Drip tray + grill Height-adjustable dispensing spout Steam/hot water spout with pannarello Front door Steam knob Coffee Brew Group Cleaning brush Control panel Coffee dose per cup adjustment knob Coffee button Temperature ready / coffee function light Steam function button Steam temperature light Alarm light Machine on light 4 INSTALLATION For your safety and other people's safety, carefully follow the "Safety Regulations" in section 3. 4.1 Packaging The original packaging has been designed and constructed to protect the machine during transport. We recommend keeping the packaging material for possible future transport. 4.2. Preliminary Operations • Remove the drip tray (10) with grill from the packaging. • Remove the coffee machine from the packaging and position it in a proper place in compliance with the requirements described in the safety regulations (section 3). • Insert the drip tray (10) into the appropriate seat. Make sure that the drip tray, the coffee grounds drawer (8) and the coffee brew unit (15) are correctly placed and that the front door (13) is closed. • Fit the cover of the coffee bean hopper (2) onto the coffee bean hopper (1). Keep the cleaning brush (16) to hand. • Before plugging in the machine, make sure that the power button (5) is switched to -0-. If the red light (22) flashes when the machine is turned on, it means that one of the above mentioned parts is not placed correctly. Important Note: Carefully read the explana tion of all the warnings displayed by the machine to the user by means of the lights on the control panel (section 13). • (Fig.25) - Lift and extract the water tank (7) and remove the cover (6). Rinse and fill it with fresh water taking care not to overfill it. Reinsert the water tank into the appropriate seat and replace the cover (6) on top of it. Always use only fresh, non-sparkling water to fill the tank (7). Hot water or any other liquid may damage the tank and/or the machine. INSTALLATION - COFFEE GRINDER 11 Do not turn on the machine without water: make sure there is enough water in the tank. • (Fig.24) - Remove the cover (2) and add the coffee beans. Always add only coffee beans in the coffee bean hopper (1). Ground coffee, instant coffee or any other object may damage the machine. • Replace the cover (2) on the coffee bean hopper (1). • Insert the plug into a suitable socket. 4.3 Circuit Priming In the beginning, after dispensing steam or when the water tank is empty, the machine’s water circuit must be primed. • The power button (5) is switched to -0-. Press button (5) to turn on the machine. The light (23) on the control panel will turn on. • (Fig.26) - Place a container beneath the steam wand (Pannarello)(12) to prime the circuit. Turn the knob (14) counter-clockwise and wait until water flows steadily out of the steam wand (Pannarello). Turn the knob (14) clockwise to stop water dispensing. • The circuit is now primed. 4.4 Using the machine for the first time or after a period of inactivity This simple operation ensures optimum brewing and must be performed: -At fi rst start-up; - When the machine remains inactive for a long time (more than 2 weeks). Dispensed water must be emptied into an adequate drain. It is not suitable for food use. If the container fills up, stop dispensing water during the cycle and empty it before resuming the operation. 1 (Fig.25) - Make sure that the water ...
Este manual também é adequado para os modelos :Cafeteiras - 10003177 (1.34 mb)
Cafeteiras - RI9737/21 (1.34 mb)
Cafeteiras - RI9737/20 (1.34 mb)