Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
Press start stop (8); milk froth or hot milk runs out of the milk frother outlet for about 60 seconds. Siemens TK76K572 | 09/2008 34 | English Press star t stop (8) again to cut the process short. Dried milk residue is dificult to remove, so clean the milk frother immediately after use (see “Cleaning the milk system”). Dispensing hot water Risk of burns The milk frother (10), from which the hot water flows, gets very hot. After use, allow to cool down first before touching. The appliance can also be used to dispense hot water, e.g. for tea. 1. Place a cup or glass under the coffee outlet. 2. Select Hot water with the rotary knob (4): Hot water ) + 3. Press > (3) to switch to the temperature selection. Set the required temperature with the rotary knob (4): Hot water ) +– 4. Press star t stop (8); hot water runs out of the milk frother outlet for about 40 seconds. Press star t stop (8) again to cut the process short. Information and settings Use i (7) to display information (press briely) and adjust settings (hold down for at least three seconds). Displaying information In the Info menu (press i (7) briely) you can call up the following information: • how many drinks have been dispensed since the appliance was irst put into operation • when the next service will be needed Information/Service Descale after 140 cups Displaying settings Hold down i (7) for at least 3 seconds; the different setting options are then displayed: Language: English .Default settings Press star t Use < and > (3) to switch between the different setting options. The currently active setting is always highlighted in white. You can change the setting that is currently displayed by turning the rotary knob (4). The changes you have made are saved automatically. It is not necessary to conirm them additionally. Siemens TK76K572 | 09/2008 English | 3 The following setting options are available to you: > Language: Turn the knob to select the display language. > Water hardness: Turn the knob to select the required water hardness (1, 2, 3 or 4) (refer also to “Checking and setting the water hardness”). > Cof fee temperature: Turn the knob to set the coffee temperature. > Auto of f after: Turn the knob to enter the time span after which the appliance should automatically switch to “energy saving mode” following the last drink preparation. A time between 5 minutes and 8 hours can be set. The default time is one hour, but this can be shortened to save energy. > Contrast: The display contrast can be set from –20 to +20 with the rotary knob (4). The default setting is 0. > Illumination: The lighting can be set to on, off or off after 10 minutes (factory setting). > Water filter: Each time a new water ilter is inserted in the water tank (12), it must be rinsed: 1. Place the water ilter in the water tank (12) and ill the tank with water up to the “max” mark. 2. Turn the rotary knob to select START short rinse for milk system and press star t stop (8). 3. Place a container with a capacity of 0....
Este manual também é adequado para os modelos :Cafeteiras - TK76K572/02 (8.39 mb)
Cafeteiras - TK76K572/03 (8.39 mb)
Cafeteiras - TK76K572/04 (8.39 mb)
Cafeteiras - TK76K572/93 (8.39 mb)