All rights reserved. Distributed by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions, Boca Raton, Florida 33431. U.S. 1-800-MR COFFEE (1-800-672-6333) Canada 1-800-667-8623 Visit us at You will find exciting and entertaining tips and ideas, including great recipes! SPR-121009 © 2010 Sunbeam Products, Inc. operando bajo el nombre de Jarden Consumer Solutions. Todos los derechos reservados. Distribuido por Sunbeam Products, Inc. operando bajo el nombre de Jarden Consumer Solution

• Do not immerse the appliance in water or any other liquid unless recommended. If you have any concerns regarding the performance and use of your appliance, please visit or contact the Sunbeam Consumer Service Line Ensure the above safety precautions are understood. About espresso coffee The Sunbeam range of espresso machines are sure to satisfy lovers of coffee. With its Italian designed and made 15 BAR pump, a ‘boiler’ heating system and Italian designed ‘crema’ system the Sunbeam Cafe Ristre

Use a fine to medium grind for domestic espresso machines. • A common mistake is running too much water through the ground coffee, resulting in a thin and bitter tasting espresso. • Ensure your coffee grinds are ‘tamped’ evenly. ‘Tamping’ refers to the amount of pressure with which coffee grinds are packed into the filter. • If your espresso pours too slowly, tamp the coffee grind more lightly, or try a coarser grind. • If your espresso is thin and watery, tamp the coffee grinds harder, or try a

Therefore the espresso machine will require occasional descaling. It is recommended that the espresso machine is descaled every 4-6 months, this will vary depending on the frequency of use. Descaling solution Use any of the following when descaling the espresso machine: . Sunbeam Espresso Machine Descaling Tablets . Sunbeam Liquid Descaler, or . Vinegar Solution. Descaling the espresso machine Note: Ensure the espresso machine is turned off and the power cord is unplugged. 1. Remove the water re

Deposits of these oils build up over time and affect the taste of the coffee and operation of the espresso machine. Regular cleaning to remove these oils is essential and will maintain the quality of the coffee the espresso machine produces and result in less maintenance being required. This is easy to do by following a few quick and easy cleaning steps after each coffee making session; . Cycle water through the group head, . Purge steam through the steam wand, . Wipe the steam wand clean with a

The machine should now be on the warming plate resting on the cloth/tea towel. 5. Using a screwdriver, unscrew the brewing filter from the brewing head. 6. Remove and set aside the washer and screw in a safe place. Important: Be careful not to lose the washer and screw once you have removed them from the brewing filter. 7. Remove the filter from the centre hole using the tip of a fork or a skewer. Wash the filter in hot soapy water, rinse and dry well. Set aside in a safe place. 8. Using a small

Simply wipe the stainless steel steam nozzle clean with a damp cloth and place the froth attachment under warm running water to remove any excess milk. Also, briefly turn the operating dial to setting to clear any remaining milk out of the steam nozzle. Caution: Steam from the nozzle is extremely hot and there is danger of scalding. Hot water drinks You are able to heat water for hot drinks such as tea or instant soups using the steam nozzle. Note: Heating liquids is done with the steam nozzle o

Thermoblock heating system Ensures the precise temperature is achieved. As espresso is made with hot rather than boiling water the thermoblock heats the water to 92°C (just below boiling point) for optimum extraction of oils from the coffee grinds. Temperatures above this will burn the coffee grinds. Crema system – Italian designed The dual-wall filter creates additional back pressure and the stabilising baffle produces a steady pour and maintains the temperature of the espresso. Secrets to the

Tip: Keep in mind that the volume of milk will increase or ’stretch’ during the texturing. 2. Pour cold refrigerated milk into a stainless steel jug, between . to ./. full. Tip: Store the stainless steel jug in the fridge so that it is well chilled. Also be sure not to rinse the jug with warm water before use. 3. Purge the steam wand of any water. With the steam wand positioned over the drip tray activate the steam function by turning the operating dial to the steam setting (25). Once any water