Assessments - 1, GPA: 3
(
)
)
|
Facilidade de uso
1A RLm. Quick Installation Guide 10/100/1000Mbps PCI Network Adapter Model # AGIGA32PCI Package Contents: • 10/100/1000Mbps PCI Network Adapter • Quick Installation Guide • Driver CD Section 1 Hardware Installation Thanks for your purchase of Airlink101® 10/100/1000Mbps PCI Network Adapter. The Installation of the 10/100/1000Mbps PCI Network Adapter requires hardware installation first and then driver installation. Step 1 Switch off the computer, unplug the power cord, and remove the computer’s cover. Step 2 Select an unused PCI slot and remove its protective bracket. Step 3 Carefully insert the Adapter and press until all the edge connectors are firmly seated inside the slot. Then, screw the Adapter’s bracket securely into the PC’s chassis. Step 4 Install the bracket screw, which secures the Adapter to the computer’s chassis. Step 5 Replace the computer’s cover and connect the network cable to the newly installed network Adapter. Reconnect the computer’s power cord and plug it into the power outlet. Section 2 Driver Installation Usually for Windows XP or above, the adapter’s driver is already included in the OS, and after you install the network adapter, your system will automatically install the driver for you. For other operating systems, before you connect the PCI Adapter to the network, you have to install the adapter’s driver first. The driver for each operating system is under a separate folder of the provided compact disk. Note: The following steps and screen shots are for Windows XP. Steps for other Windows operating systems will be noted beneath each screen shot if different. Step 1 At the Found New Hardware Wizard, select Install from a list or specific location (Advanced) and click Next. Windows 2000: Click Next at the Found New Hardware Wizard. Select Search for a suitable driver for my device (recommended) and click Next. Windows ME: Click Next at the Add New Hardware Wizard. Select Specify the location of the driver (Advanced) and click Next. Windows 98SE: Click Next at the Add New Hardware Wizard. Select Search for the best driver for your device (Recommended) and click Next. Step 2 Check on Include this location in the search. Click on Browse to select E:\WINXP (where E is the letter of your CD drive) and click Next. Windows 2000: Insert the provided driver disk. Select Specify a location and click Next. At the copy manufacturer’s files from field, select E:\Win2k (where E is the letter of your CD drive) and click OK. Windows ME: Insert the provided driver disk. Select Specify a location, select E:\WinME (where E is the letter of your CD drive) and click Next. Windows 98SE: Insert the provided driver disk. Select Specify a location, select E:\Win98 (where E is the letter of your CD drive) and click Next. Step 3 Click Next to install the driver. Step 4 Click Continue Anyway at the Windows Logo Compatibility message. has not passed Windows Logo testing to verify its compatibility with Windows XP. (T ell me why this testing is important 1 Continuing your installation ol this software may impair or destabilize the correct operation of your system either immediately or in the future. Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing. Continue Anyway STOP Installation Windows 2000: Click Yes to continue. Windows ME: Insert the Windows ME CD-ROM and click OK. Windows 98SE: Insert the Windows 98SE CD-ROM and click OK. Step б Click Finish. Restart your computer. Section З Technical Support E-mail: support@airlink101.com Toll Free: 1-888-746-3238 Website: *Actual throughput will vary. Specifications are subject to change without notice. All products and trademarks are the property of their respective owners. Photos of product may not reflect actual content. Copyright ©2009 Airlink101®...