Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
1. Connect one end of the CrossFire™ bridge interconnect to the internal VMO connection on one of the cards. 2. Connect the other end of the CrossFire™ bridge interconnect to the corresponding internal VMO connection of the other card. 3. Repeat Steps 1 and 2 to connect the second CrossFire™ bridge interconnect. 4. Connect the DVI-I connection on the primary CrossFire™ graphics card to your monitor. “Before CrossFire™ can be enabled, you need to close the 3D application or video playback that is currently running.” You cannot enable CrossFire™ in the ATI Catalyst™ Control Center if a 3D application, game, or video playback, such as a DVD movie, is running. Close all open 3D applications, games, and movie player applications, and then enable CrossFire™. CrossFire™ Ensure the CrossFire™ bridge interconnects have been Aspect in ATI correctly attached. The CrossFire™ aspect is only Catalyst™ available when the two ATI Radeon™ HD 2600 Series Control Center is graphics cards have been correctly installed and Not Displayed connected together. “CrossFire™ Is This error occurred because CrossFire™ did not correctly Currently detect your graphics hardware or there is a problem with Unavailable.” the software. Make sure: • The graphics cards are installed correctly. • The interconnects are installed correctly. • All running 3D applications are closed. • You restart the ATI Catalyst™ Control Center. For information on installing the software see the Getting Started Guide that came with your graphics card. Screen rotation function does not work or is unavailable Screen rotation is not an available feature on CrossFire™ systems. HDTV/HDTV Adapter Troubleshooting Problem Possible solution The colors on my TV display are incorrect • Ensure that the connections between the Component Video Adapter and your HDTV are correct (Y=Green, Pb=Blue, Pr=Red). There is no display on my TV • Your TV will not display anything until Windows® starts; this may take several minutes. • Ensure that the HDTV Component Video Adapter is properly connected and the TV input is correctly configured, and then restart your computer. DVDs will not play in 720p or 1080i modes • Copy-protected DVDs restrict playback to 480i and 480p modes. I can’t see the entire display • If your component input device supports it, try 720p mode. The display appears tilted • Consult the HDTV user’s manual. My CRT display is green • The computer is in component output mode. Restart the computer with the CRT monitor connected. Determine the System Card Bus Type There are two possible card bus types, AGP and PCIe™. If you have an AGP card you may need to update the motherboard and chipset drivers. 1 Look at the motherboard and card. 2 Using the illustration below for comparison, determine whether you have AGP or PCIe™ connectors. AGP and PCIe™ graphics cards and system bus connectors Legend AGP card and AGP expansion slot PCIe™ card and PCIe™ expansion slot 3 If you have AGP connectors and the graphics card is not working correctly, you may need to update the motherboard and chipset drivers for the computer. Updating your AGP Motherboard/Chipset Drivers Note: This section applies only if you are installing an AGP graphics card. If your computer has an AGP bus, you may need to update the motherboard AGP drivers before installing a new graphics card. The AGP drivers for your motherboard enable AGP functionality for the motherboard chipset. These drivers may be referred to using any of the following names: • AGP Driver • AGP Miniport • AGP VXD Driver • Chipset Driver • GART Driver • VGART Often you will see the name of a motherboard chipset in connection with these terms. For example: • ALi GART Driver • AMD AGP Miniport • Intel VGART • VIA AGP Driver Obtain AGP drivers for your motherboard/chipset If you experience problems with the AGP chipset drivers, you may need a software update from the motherboard or chipset manufacturer. Note: Installing the wrong AGP motherboard/chipset drivers may prevent Windows® from launching successfully. Make sure that the drivers you install are designed to function correctly with the motherboard. If you are uncertain, consult with the motherboard manufacturer for advice. If you purchased a new motherboard, you likely received a CD that contains these drivers. You can also locate these drivers on the motherboard manufacturer's Web site. Update AGP drivers for the motherboard/chipset 1 Navigate to the Windows® Control Panel and open System. 2 In the System Properties dialog, click the Hardware tab. 3 Click Device Manager. 4 Select System Devices. 5 Scroll through the list of System Devices until you find a listing for the AGP controller. The chipset manufacturer’s name will appear as the device name. 6 To determine the manufacturer, click the [AGP device name] > Driver > Driver Details.: Sample Motherboard/Chipset Manufacturers Advanced Micro Devices (AMD) VIA Technologies Acer Laboratories (ALI) Sil...