Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
Both Drive A & B are 3 mode Floppy Drives. Video The categorydetects the type ofadapter used for the primary systemmonitorthat must matchyour video displaycardand monitor. Althoughsecondary monitors aresupported, you do nothave to selectthe type in setup. EGA/VGA Enhanced Graphics Adapter/Video Graphics Array. For EGA, VGA, SVGA, or PGA monitor adapters CGA 40 Color Graphics Adapter, power up in 40 column mode CGA 80 Color Graphics Adapter, power up in 80 column mode MONO Monochrome adapter, includes high resolution monochrome adapters Halt on The category determines whether the computer will stop if an error is detected during power up. NO Errors The system boot will not stop for any error that may be detected and you will be prompted. All Errors Whenever the BIOS detects a non-fatal error the system will be stopped. All, But Keyboar The system boot will not stop for a keyboard error; it will stop for all other errors. (Default value) All, But Diskette The system boot will not stop for a disk error; it will stop for all other errors. All, But Disk/Key The system boot will not stop for a keyboard or disk error; it will stop for all other errors. 26 BIOS Setup Memory The category is display-only which isdetermined by POST(PowerOn Self Test) ofthe BIOS. Base Memory ThePOSToftheBIOS willdeterminetheamountofbase(orconventional)memory installed in the system. The value of the base memory is typically 512 K for systems with 512 K memory installed on the motherboard, or 640 K for systems with 640 K or more memory installed on the motherboard. Extended Memory The BIOS determines how much extended memory is present during the POST. This is the amount of memory located above 1 MB in the CPU’s memory address map. 27 GA-8IDML Series Motherboard Advanced BIOS Features CMOS Setup Utility-Copyright (C) 1984-2001 Award Software Advanced BIOS Features First Boot Device Floppy Second Boot Device HDD-0 Third Boot Device CDROM Boot Up Floppy Seek Disabled Boot Up Num-Lock On Password Check Setup MPS Version Control For OS 1.4 HDD S.M.A.R.T. Capability Disabled Item Help Menu Level ????: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults Help Figure 3: Advanced BIOS Features First/ Second/ ThirdBootdevice Floppy Select your boot device priority by Floppy. LS120 Select your boot device priority by LS120. HDD-0~3 Select your boot device priority by HDD-0~3. SCSI Select your boot device priority by SCSI. CDROM Select your boot device priority by CDROM. 28 BIOS Setup Boot Up Fl oppy Seek DuringPOST,BIOS willdetermine the floppydiskdrive installed is40or80tracks.360K type is40 tracks 720 K, 1.2 M and 1.44 M are all 80 tracks. Enabled BIOS searches for floppy disk drive to determine it is 40 or 80 tracks. Note that BIOS can not tell from 720 K, 1.2 M or 1.44 M drive type as they are all 80tracks. (Default value) Disabled BIOS will not search for the type of floppy disk drive by track number. Note that there will not be any warning message if the drive installed is 360 K. Boot Up NumLock On Keypad is number keys. (Default value) Off Keypad is arrow keys. Passwor d Check This category allows you to limit access to the system and Setup, or just to Setup. System The system can not boot and can not access to Setup page will be denied if the correct password is not entered at the prompt. Setup The system will boot, but access to Setup will be denied if the correct password is not entered at the prompt. (Default value) MPS Version Control For OS (Support Multi Processor Specification revision 1.4) 1.4 Support MPS Version 1.4 . (Default Value) 1.1 Support MPS Version 1.1. HDD S.M.A.R.T. Capability Enabled Enabled HDD S.M.A.R.T. Capability. Disabled Disabled HDD S.M.A.R.T. Capability. (Default value) 29 GA-8IDML Series Motherboard Advanced Chipset Features CMOS Setup Utility-Copyright (C) 1984-2001 Award Software Advanced Chipset Features Configure DRAM Timing SPD ?CAS Latency Time 2 ?Active to Precharge Delay 5 ?DRAM RAS# to CAS# Delay 2 ?DRAM RAS# Precharge 2 ?Refresh Mode Select 15.6usec DRAM Data Integrity Mode Non-ECC DRAM Read Thermal Mgmt Disable Delay Transaction Enable AGP Aperture Size(MB) 64 Delay Prior to Thermal 16Min Item Help Menu Level ????: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:GeneralF5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults Help Figure 4: Advanced Chipset Features Configure DRAMTiming SPD Set Configure DRAM Timing Control by SPD. (Default value) Manual Set SConfigure DRAM Timing Control by Manual. CAS latency Time 3 For Slower SDRAM DIMM module. 2 For Fastest SDRAM DIMM module. (Default Value) Active toPrecharge Delay 5 Set active to Precharge delay timing is 5 clk. (Default value) 6 Set active to Precharge delay timing is 6 clk. 7 Set active to Precharge delay timing is 7 clk. 30 BIOS Setup SDRAMRAS# toCAS# delay 3 2 Set SDRAM RAS# to CAS# delay 3 SCLKs. Set SDRAM RAS# to CAS# delay 2 SCLKs.(Default value) SDRAM...