Assessments - 3, GPA: 3.3 ( )

Fabricante : iHome Arquivo Tamanho: 703.34 kb Arquivo Nome : Língua de Ensino:

With the cable held tight, gently slide the reel approximately 1 in. (2.5 cm) on the cable toward the mouse. The cable should now fully retract. 2. Connect the USB cable to a USB port on your netbook, or to your USB hub. The drivers for your mouse load automatically. connect to a USB port on your netbook 3. speak into the built-in microphone connect earbuds 1. connect earbuds to computer microphone Plug the green connector into the 3.5 mm (1/8”) headphones output. Plug the pink connector into the 3.5 mm (1/8”) microphone input. 2. place the earbuds in your ears product operating tips USB hub • You can add up to four devices to your netbook hub to transfer music, videos and files. mouse • The scroll wheel is also a button. Press the scroll wheel (without rolling it) to automatically scroll a document or web page, then move your mouse up or down to set the automatic scroll speed. troubleshooting situation try this USB hub does not work mouse does not work • Ensure the USB cable is properly inserted into the hub and a USB port on your netbook. • Ensure the devices are connected properly. • Connect the hub to a different USB port. • Ensure the USB cable is connected. If it is, try connecting it to a different USB port. • Ensure the optical sensor on the bottom of the mouse is clean. • Restart your netbook. USB cable • Extend the cable slightly and on mouse release slowly in one smooth does not motion. retract situation try this cannot hear • Ensure the green headphone audio connector is inserted properly into the headphone output. • Ensure the volume on your computer is not muted and the headphone volume is adjusted so it is high enough to hear. microphone • Ensure the pink microphone does not connector is inserted properly work into the microphone input. • Ensure the microphone volume on your computer is not muted and the microphone volume is properly adjusted. FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction guide, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • R...

Baixe o seu

Para fazer o download, introduza 2 dígitos :