Assessments - , GPA: ( )

Instruções de Operação Ultra Products, Modelo 96500

Fabricante : Ultra Products
Arquivo Tamanho: 43.96 kb
Arquivo Nome :

Língua de Ensino:

O documento está colocado, por favor, espere

Baixe o seu Fechar

O documento está colocado, por favor, espere

Baixe o seu Fechar

Figure 2. Connecting the cable 5. Reconnect the system power and other peripherals to your computer. Driver Installation This section provides information on how to install the UltraATA 133 PCI drivers for the following operating systems: Windows 98SE...........................................................page 5 Windows ME ............................................................. page 6 Verify Windows 98SE/ME Installation ..............page 6-7 Windows NT 4.0 ....................................................... page 7 Verify Windows NT 4.0 Installation ...................... page 8 Windows 2000 ........................................................... page 8 Windows XP/Server 2003 ....................................... page 9 Verify Windows 2000/XP/2003 Installation ...... page 10 Bios Configuration..................................................page 10 Windows 98SE Windows 98SE 1. Install the board and follow Microsoft procedures to install Windows 98SE accordingly. 2. Once Windows has been installed, right click My Computer and click Properties. Select Device Manager tab. 3. Double click PCI Mass Storage Controller listed under Other Devices. 4. Select Driver tab, then click Update Driver button. 5. Insert the driver diskette and click Next. 6. Select Search for a better driver ... and click Next. 7. Check Floppy disk drives, uncheck the other boxes, then click Next. Click Next again, then Finish. 8. Remove the driver diskette and restart Windows to complete driver installation. For Existing Windows 98SE Installation 1. Install the board and boot up Windows 98SE. 2. At the Add New Hardware Wizard, click Next. 3. Select Search for the best driver for your device and click Next. 4. Insert the driver diskette, check Floppy disk drives, uncheck the other boxes, then click Next. 5. Click Next, then Finish. 6. Remove the driver diskette and restart Windows to complete driver installation. Windows ME Windows ME 1. Install the board and follow Microsoft procedures to install Windows ME accordingly. 2. Once Windows has been installed, right click My Computer, then click Properties. Select Device Manager tab. 3. Double click PCI Mass Storage Controller listed under Other Devices. 4. Select Driver tab, then click Update Driver button. 5. Insert the driver diskette, select Automatic search for a better driver (Recommended), then click Next. 6. Click Finish, remove the driver diskette and click Yes to restart Windows to complete driver installation. For Existing Windows ME Installation 1. Install the board and boot up Windows ME. 2. At the Add New Hardware Wizard, insert the driver diskette. 3. Select Automatic search for a better driver (Recommended), then click Next. 4. Click Finish. 5. Remove the driver diskette and restart Windows to complete driver installation. To Verify Windows 98SE/ME Installation 1. Right-click My Computer, then click Properties. Select Device Manager tab. 2. Double click SCSI Controllers, an entry, Silicon Image SiI...