Assessments - 4, GPA: 3.8
(
)
)
|
Facilidade de uso
declares that their DS-DELL-100 & DS-DELL-220 SERIES DOCKING STATIONS: Are classified within the following EU Directives: EU Electromagnetic Compatibility Directive 2004/108/EC, 2009/19/EC And further conform with the following EU Harmonized Standards: EN 55022 (2006) + A1 2007, EN 55024: 1998 + A1: 2001 + A2: 2003 EN 50498: 2010 Clause 7.1 Broadband Radiated Disturbances - Quasi-Peak Clause 7.2 Narrowband Radiated Disturbances - Average Clause 7.3 Conducted Radiated Disturbances - Severity Level 2 Dated: September 28 , 2011 Position of signatory: Chief Information Officer / Chief Financial Officer Name of signatory: Steve Ferraro Signed: 4 Parts Included Docking Station Macro Alignment Brackets (DS-DELL-220 Series only) Strain Relief Points Foot Pads (DS-DELL-220 Series only) Docking Connector Front Hooks Lock Power Button/LED Latch Handle Mounting Bracket Hardware Kit This Hardware Kit includes: 1. Zip Ties (4) 2. Keys (2) 3. 1/4”-20 Screws (4) 4. M5 Screws (4) Tools required for installation: • 3mm Hex Drive (For attaching Mounting Bracket to Docking Station with M5 Screws) • 5/32” Hex Drive (For attaching Mounting Bracket to Motion Device with 1/4”-20 Screws) Port Replication Capability Side Connectivity Rearward Connectivity *(Antennas for DS-DELL-101-3 only) Mouse Keyboard Antennas* (Wi-Fi, GPS, Cellular) Microphone Parallel (DB-25) VGA Display (x2) (HDMI Dongle Required) eSATA Headphone Ethernet USB 2.0 (x2) Power Input Serial USB 2.0 (x3) 5 • 1-800-524-9900 Installation 1) Install the Mounting Bracket to the Motion Device using (4) 1/4“-20 screws (Hardware Kit Item 3). Torque screws to 120 in-lbs (13.4Nm) ± 10%. NOTE: Numerous hole patterns present in Mounting Bracket will accommodate Havis Motion Devices as well as most competitors’. 1/4”-20 Screws Mounting Bracket Typical Motion Device Example (not included) 2) Lower the Docking Station to the Mounting Bracket as shown and secure with (4) M5 screws (Hardware Kit Item 4). Torque screws to 25 in-lbs (2.8 Nm) ± 10%. M5 Screws NOTE: We recommend applying a drop of medium strength (blue) thread locking adhesive to the threads of all fasteners. 6 Cable Management 1) Tip the Docking Station forward to a position that is comfortable to work with. 2) Install all cables that are necessary for computing needs. 3) Use Zip Ties (Hardware Kit Item 1) to strain relieve cables to the Strain Relief Points at rear of Docking Station. 4) Gather all cables to one side and tie off to unused holes on underside of Docking Station. Insert as many zip ties as necessary to secure cables. 7 • 1-800-524-9900 Cable Management (continued) 5) Create a service loop with cables to ensure that no tension is on the connectors and to enable intended motion. 6) Tie off cables onto a stationary part of the mounting system. (Mounting system not included with Docking Station) This loop must be large enough to allow full range of expected rotation and extension without stressing connections. Collect...
Este manual também é adequado para os modelos :Acessórios de computador - DS-DELL-101 (5.63 mb)
Acessórios de computador - DS-DELL-101-3 (5.63 mb)
Acessórios de computador - DS-DELL-103 (5.63 mb)
Acessórios de computador - DS-DELL-223 (5.63 mb)