Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modi fications on print errors or update specifications without prior notice. Version No. : R1.0 Edition Time : 2013-1-6 Manual No. : NOTE: Do not use the device in an enclosed environment or where heat dissipation is poor. Prolonged work in such space may cause excessive heat and raise ambient temperature, which may lead to automatic shutdown of the device for your safety. In the case of such event, cool the device in a well-ventilated place before turning on for normal use. Getting to Know Your Device Appearance The following figure shows the appearance of the device, it is only for your reference. The actual device may be different. Right Side Front Left Side Bottom Interface and Buttons 1.Power Hold the Power button to switch on/off the device. 2.Memory card slot (microSD card) It is where you insert the memory card (microSD card). 3.WPS This button is used to start/end Wi-Fi Protected Setup authentication process and enable/disable the Wi-Fi function. • Hold it for 3 seconds to activate the WPS function. • When the WPS function is available, press it to deactivate the WPS function. • Press it to enable/disable Wi-Fi function. 4. OLED Screen It indicates the signal type, signal strength, battery, Wi-Fi, etc. 5. External Antenna Connector It is used to connect an external antenna to enhance the signal strength. 6.Charger/USB port • Charge your device. • Connect the client to your device via USB cable. NOTES: • microSD logo is a trademark of SD Card Association. • Hold the WPS and Power buttons simultaneously until the OLED screen turns off, and then release the buttons. The device will restart automatically and restore to the factory default settings. Indicators When the device is powered on, the following icons will appear on the OLED screen, with the corresponding indicates listed in the table below: Icon Indication Network signal strength. 2G 3G Network type. 2G or 3G icon will appear on the OLED screen according to the network being connected. Connect to the Internet automatically. Connect to the Internet manually. Roaming network indication. New message received. Wi-Fi Status and number of the connected users. Battery power indication. Connect/Disconnect The device connects / disconnects the Internet. Connection Scenario The following picture is the application example. All of the client devices can surf on the Internet at the same time. NOTES: • You can only use USB cable or Wi-Fi to connect this device. • If you want to use Wi-Fi, make sure the client supports the Wi-Fi function. • It is recommended that the operating system of your PC is Windows ...
Este manual também é adequado para os modelos :Acessórios de computador - MF60 (GLO) (3.84 mb)