Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
Click Apply to confirm your configuration. DMZ You can setup a De-militarized Zone(DMZ) to separate internal network with the Internet. Select Firewall > DMZ, the DMZ setting is shown in the following figure: If you select Enable, set the DMZ IP Address, and then click Apply to confirm your configuration. 38 System Security You can configure system firewall to protect AP or router from being attacking. Select Firewall > System Security, the system security setting is shown in the following figure: • Allow or Deny the remote management function, and then click Apply. • Allow or Deny ping from WAN filter on requirement, and then click Apply. Advanced Status Select Settings > Advanced > Status, the system information is shown in the following figure: Management Select Settings > Advanced > Management, the administrator set tings information is shown in the following figure: 39 You can change the administrator’s password. Click Apply to confirm your configuration. Restore Select Settings > Advanced > Restore, click Restore to set all the settings to their factory default values, and then the device will restart automatically. PIN Manage Note: Pin Manage can be used in 4G Gateway mode. Select Settings > Advanced > PIN Manage, the PIN manage is shown in the following figure: If you select Modify, the modification parameters are shown in the following figure: Type the old PIN code, and then type two times the new PIN code. Click Apply to confirm your configuration. 40 Notes: Consecutive inputting wrong PIN code for three times can cause locking of UIM card. To unlock, you need PUK code. PIN code and PUK code may be offered together with the UIM card. If not, please contact with network operator. Please change default PIN code to your own as soon as possible. Router Note: Router can be used in 4G Gateway mode and Cable Broadband mode. Select Settings > Advanced > Router, the router information is shown in the following figure: • IP Address: IP address for LAN interface. • Subnet Mask: Subnet mask for the IP address. • MAC Address: MAC address for the LAN interface. • DHCP Server: Enable or disable DHCP Server function. • DHCP IP Pool: Allocate begin and end IP address for IP pool. • DHCP Lease Time: Define how long the leased IP address will be expired, and will relocate new IP address. Click Apply to confirm your configuration. 41 Upgrade Firmware Select Settings > Advanced > Upgrade Firmware to upgrade the software version of the router. Click Browse..., locate the latest software version, and then click Upgrade. Time Select Settings > Advanced > Time to set the time manually or select SNTP Auto Synchronization mode. Usage of WPS If your client device supports WPS, you need not to input the password manually after WPS has been available. Please do the following: 1. Start up your device. 2. Launch the client device connected to your device. 3. Enable the WPS function of your device. 4. Enable the WPS function of the client. Notes: For ...
Este manual também é adequado para os modelos :Equipamento de rede - MF29T(Airtel) (1.6 mb)