Assessments - 2, GPA: 4.5
(
)
)
|
Facilidade de uso
• Do not attempt to service this unit. Instead, disconnect it and visit • Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended. Do not use this equipment in the presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide. Package Contents • Local Unit • Remote Unit • VGA with Audio Splitter Cable • (2) 5V, 2.0A DC Power Supplies • (2) Wallplate Screw Sets • 110 Punchdown Tool • Screwdriver • Owner’s Manual Product Features • Extends a VGA* and audio signal up to 500 ft. (150 m) using standard Cat5/5e/6 cable (or up to 1000 ft. at 1024x768 using Zero-Skew UTP cable) * Supports VGA, SVGA, XGA, UXGA and WUXGA monitors. • Provides connections for optional local monitor and speakers • Features built-in Equalization and Gain controls to adjust the video image • Supports video resolutions up to 1920x1440 • No drivers required Product Features Optional Accessories • P504-Series Monitor Cables with RGB Coax and Audio, HD15 Male/ Male, Mini-Stereo 3.5 mm Male/Male • P312-Series 3.5 mm Mini-Stereo Cable • P502-Series Monitor Cables with RGB Coax, HD15 Male/Male • P524-Series Zero-Skew UTP Bulk Cable • N020-01K-GY Cat5e Bulk Stranded Cable, 1000 ft. • N022-01K-GY Cat5e Bulk Solid Cable, 1000 ft. • N222-01K-GY Cat6 Bulk Solid Cable, 1000 ft. Specifications Signal Type VGA, SVGA, XGA, UXGA and WUXGA Video Amplifier Bandwidth 350 Mbps Input DDC Signal 0.7 Volts p-p (TTL) Signal Noise Ration 90 dB Local Unit Ports (1) HD15 Female, (1) 3.5 mm Female, (1) 110 Punchdown Female Remote Unit Ports (1) HD15 Female, (1) 3.5 mm Female, (1) 110 Punchdown Female Power Supply (2) 5V, 2.0A DC Power Supplies Dimensions (Local Unit) 2.75 in. (W) x 4.5 in. (H) x 1.1 in. (D) Dimensions (Remote Unit) 2.75 in. (W) x 4.5 in. (H) x 1.1 in. (D) Local Unit Weight 0.2 lb Remote Unit Weight 0.2 lb Note: Specifications are subject to change without notice. Mass and dimensions are approximate; please take the actual products as the standard. Features 1 Source Video-In Port: HD15 Female Connector. 2 Local Unit Power LED: This LED illuminates when the external power supply is connected and the unit is receiving power. 3 Source Audio-In Port: 3.5 mm Female Connector. 4 Power Jack: The 5V, 2A external power supply plugs in here. 5 110 Punchdown Connector: Connect Cat5/5e/6 cable between the 110 Punchdown Connectors on the local and remote units. 6 Remote Unit Video-Out Port: HD15 Female Connector. 7 Remote Unit Power LED: This LED illuminates when the external power supply is connected and the unit is receiving power. 8 Remote Unit Audio-Out Port: 3.5 mm Female Connector. 9 Gain Adjustment: Adjusts brightness. 10 EQ Adjustment: Adjusts equalization length. Local Unit (By Source) Remote Unit (By Display) PowerLocalAudioDC5V, 2.0A PowerGainEQRemoteAudioDC5V, 2.0A 3 8 2 7 1 6 9 10 4 4 5 Rear Installation 1 2 5 6 3 4 7 1 Connect the Male end of the VGA with audio splitter cable to the HD15 and 3.5 mm ports on the source computer. 2 Connect one of the Female ends of the VGA with audio splitter cable to the Local Unit’s HD15 and 3.5 mm ports using a VGA cable and audio cable. 3 (Optional) Connect a local monitor and speakers to the remaining Female connectors of the VGA with audio splitter cable using a VGA cable and audio cable. 4 Connect the external power supply to the power jack on the local unit and plug it into an appropriate power source. 5 Connect the 110 Punchdown Connector on the local unit to the 110 Punchdown Connector on the remote unit using Cat5/5e/6 cable. 6 Connect the HD15 and 3.5 mm ports on the remote unit to a monitor and speakers using a VGA cable and audio cable. 7 Connect the external power supply to the power jack on the remote unit and plug it into an appropriate power source. 8 Turn the display(s) on first. 9 Turn on the computer. 10 If the video on your monitor is either too dark or too light, use the Gain Adjustment on the remote unit. 11 If the video on your monitor is fuzzy, or shows a ghosting effect, use the EQ Adjustment on the remote unit. Warranty & Warranty Registration 1-Year Limited Warranty TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products. To obtain service under this warranty, you must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service center. Products must be returned to TRIPP LITE or an authorized TRIPP LITE service center with transportation charges prepaid and must be accompanied by a brief description of the problem encountered and proof of date and place of purchase. This warranty does not apply to equipment wh...