Assessments - 1, GPA: 5
(
)
)
|
Facilidade de uso
This product comes with a limited lifetime warranty. Before using your product, please thoroughly read and follow the instructions inside this manual. If you still need help, see the back page for other support options. If you want to know more about our products, visit us online at system requirements • Windows® XP, Windows Vista® or Windows 7 • Mac OS X v10.5.x or later • USB port features cooling pad • two built-in fans • USB powered • storage compartment for USB cable mid-size wireless mouse • plug-n-play, no synching needed • 2.4 GHz frequency, connect up to 15 feet • high-performance optical sensor • power-saving on/off switch • stowable USB nano receiver set up cooling pad 1. insert knobs (optional) To increase the angle at which your netbook will sit on the pad, insert the two knobs into the pre-drilled holes that provide best support for your netbook. ab 2. 3. position your netbook on the cooling pad FANSPEEDOFFONconnect USB cable to cooling pad4. SPEEDOFFON 5. connect USB cables to netbook 6. turn fan on and adjust the fan speed as desired connect to a USB port on your netbook FANSPEEDOFFONon / offswitch power indicator light fan speedcontrol side view 2. insert batteries connect mouse 1. remove battery cover 3. replace cover OnOffbatterycompartment cover bottom view of mouse OnOff 4. connect USB nano receiver bottom view of mouse connect to a USB port on your netbook 5. turn mouse on OnOffOn/Off switch OnOffoptical sensor On/Off switch USB nano receiver storage slot 8 product operating tips cooling pad • When the cooling pad is connected and on, the power indicator light glows blue. • Turning the fan speed control to the far right will stop the fan without turning off the cooling pad. • The USB power cord and angle position knobs can be stored in the cooling pad when not in use. To open the storage slot, press the right side button: mouse • Store the USB nano receiver in the storage slot in the bottom of the mouse. • Switch off your mouse when traveling or to conserve battery life. • The scroll wheel is also a button. Press the scroll wheel (without rolling it) to automatically scroll a document or web page, then move your mouse up or down to set the automatic scroll speed. • Your mouse has two sensitivity settings, standard mode and high-performance mode. High-performance mode allows the cursor to move very quickly, and is useful for activities such as gaming. Press the DPI button (behind the scroll wheel) to switch from standard mode to high-performance mode and back. troubleshooting situation try this cooling pad fans do not work mouse does not work • Ensure the USB power cable is properly connected. • Ensure your netbook is turned on. • Ensure the cooling pad power switch is turned to the on position. • Ensure the fan speed control is not turned all the way to the right. • Ensure the USB nano receiver is connected. • Connect the USB nano receiver to a different USB port. • Check that the batteries are inserted correctly. • Install fresh batteries. • Move the mouse closer to the USB nano receiver. • Ensure the optical sensor on the bottom of the mouse is clean. situation try this low • Install fresh batteries. battery indicator continues to blink FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction guide, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult a service representative for help. Properly shielded and grounded cables and connectors must be used in order to comply with FCC emission limits. LifeWorks is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user’s authority to operate the...