Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Front/Top view of the computer
Rear view of the computer
Setting up the SLI dual graphics card
Windows help system
1 Unpack
4 Choose the right voltage
6 Turn on the computer
Selected models are equipped with a voltage selection switch. You can find it
1. Open the NVIDIA Control Panel by right-clicking on the desktop and then
The Windows help system provides you with detailed information about using
Computer
Keyboard*
Mouse*
Power cord
Publications
at the rear of your computer. Models without a voltage selection switch control
selecting NVIDIA Control Panel.
the Windows operating system.
voltage automatically.
To access the Windows help system, do the following:
Open the Start menu and then click or tap Get Started to get more details.
If the electricity supply range is 100-127 V AC, set the switch to 115 V.
You can also enter Get Started or what you’re looking for in the search box
If the electricity supply range is 200-240 V AC, set the switch to 230 V.
on the taskbar. You’ll get suggestions and answers to your questions about
Windows and the best search results available from your PC and the Internet.
* Selected models only.
To perform system recovery after a serious error in Windows 10, click or tap
NOTE: Some models may contain items not listed here.
the Start button and select Settings → Update & security → Recovery.
115
230
Then, follow the instructions on the screen for system recovery.
ATTENTION: The Windows operating system is provided by Microsoft
Corporation. Please use it in accordance with the END USER LICENSE
2 Connect the keyboard and mouse
5 Connect the monitor and power cables
Connecting to the Internet
AGREEMENT (EULA) between you and Microsoft. For any question related
to the operating system, please contact Microsoft directly.
You need a contract with an Internet Service Provider (ISP) and some hardware
in order to connect to the Internet. ISPs and the services they offer vary by
country. Contact your ISP for services available in your country. Your computer
supports wireless (selected models only) or wired networks that connect your
computer to other devices.
2. Select 3D Settings, followed by Configure SLI, Surround, PhysX. Click
Maximize 3D performance in the SLI configuration window, and then
Wired network connection
choose Auto-select (recommended) in the PhysX settings window.
The following information refers to ideacentre Y900 RE machine type:
For wired networks, connect one end of an Ethernet cable (purchased
90FK [Y900 RE-34ISZ / Energy Star]
separately) to the Ethernet connector on your computer, and then connect the
other end to the network router or broadband modem. Consult your ISP for
The descriptions in this guide might be different from what you see on your computer,
Memory card reader
Headphone connector
USB 2.0 connectors
USB 3.0 connectors
detailed setup instructions.
depending on the computer model and configuration.
USB 3.0 connector/USB power
Microphone connector
PS/2 keyboard connector
Ethernet connector
Product design and specifications may be changed without notice.
NOTE: Broadband modem and router installation procedures vary
off charging connector 1
Power button
HDMI connector 1
Audio connectors
Lenovo, the Lenovo logo and ideacentre are trademarks of Lenovo in the United States,
3
depending on the manufacturer. Follow the manufacturer’s instructions.
USB 3.0 connector
Optical drive 1
DVI connector
PCI-Express card area 2
other countries, or both.
Connect the Ethernet cable
USB 2.0 connectors
On-board VGA connector
Power connector
Windows is a trademark of the Microsoft group of companies.
Wireless network connection
Other company, product, or service names may be trademarks or service marks of others.
For wireless networks, you can use the built-in Wi-Fi antenna to access your
wireless home network.
© Copyright Lenovo 2016. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or
To connect your computer to the wireless network:
software is delivered pursuant to a General Services Administration “GSA” contract, use,
—— Master Card
Click or tap the network icon on the taskbar, then select the name of your
reproduction, or disclosure is subject to restrictions set forth in Contract
No. GS-35F-05925.
1
—— Slave Card
router. Click or tap Connect, then follow the steps on the screen.
Selected models only.
1 Selected models only.
2
Test the wireless network by opening your Web browser and accessing any
Different cards provide different connectors.
ATTENTION: When connecting to a monitor, ensure that you use the Master
Web site.
Version 1.0
2016.04
Card connectors. There will be no signal output from the monitor if the
connection is made with the Slave Card.
ATTENTION: Do not insert 3-inch discs into the optical drive.
NOTE: If your model has two VGA monitor connectors, be sure to use the
connector on the graphics adapter.
SP40L06346