Log:
Assessments - 3, GPA: 4.7 ( )

Instruções de Operação COBY electronic, Modelo NBPC1022

Fabricante : COBY electronic
Arquivo Tamanho: 2.13 mb
Arquivo Nome : NBPC1022_MN.pdf
Língua de Ensino: enesfrdept
Ir para baixar



Facilidade de uso


Battery latch (manual) 2. Battery pack 3. Battery latch (automatic/ spring-loaded) Do not attempt to disassemble or replace your hard drive. For assistance with hard drive replacement and repair, contact a qualified service professional. Page 11 Basic Operation Basic Operation English Power Your computer includes both an AC adapter and built-in, rechargeable lithium-ion battery for maximum portability. AC Power Use the AC adapter to run your computer on AC power and charge the battery. To connect the AC adapter: • Connect the power cord to the transformer pack. • Plug the power cord into an electrical outlet. • Connect the AC adapter to the AC power adapter jack of the computer. Battery Power Make sure the battery is fully charged before first use. The battery power status indicator will flash when the battery is low. Connect the AC adapter as instructed above to charge the battery. To replace the battery: • Shut down the computer and disconnect all cables, including the AC power cord. • Turn the computer over to access the battery release. Slide the battery release latch to the unlock position and hold. • Slide the battery out. • Slide the replacement battery into the bay until it clicks into place. Slide the release latch to the locked position. Page 12 Coby Electronics Corporation English The components and programs on your computer consume power at different rates. Using power-intensive components/ programs will cause the battery to drain faster. Your computer’s operating system may run more slowly when operating on battery power. Use only approved battery packs to power your computer. Using an incompatible battery may increase the risk of fire or explosion. Do not attempt to disassemble or modify the battery pack. A battery pack other than the one specified by us, or a disassembled or modified battery pack, is not covered by the warranty. When disposing of the battery, comply with local ordinances and regulations. Do not attempt to dispose of the battery in your household trash. Basic Operation English The components and programs on your computer consume power at different rates. Using power-intensive components/ programs will cause the battery to drain faster. Your computer’s operating system may run more slowly when operating on battery power. Use only approved battery packs to power your computer. Using an incompatible battery may increase the risk of fire or explosion. Do not attempt to disassemble or modify the battery pack. A battery pack other than the one specified by us, or a disassembled or modified battery pack, is not covered by the warranty. When disposing of the battery, comply with local ordinances and regulations. Do not attempt to dispose of the battery in your household trash. Basic Operation Page 13 Basic Operation Basic Operation English Getting Started Open the display panel and adjust it for comfortable viewing. Turning On Your Computer Press the power button to turn on the computer. Sleep Mode When you finish working with your computer, you can put it to sleep or shut it down. Use sleep mode if you will be away from your computer for only a short time. To enter sleep mode: • Click the Start menu and select Sleep, or • Press Fn + Esc. • To wake the computer, press the Power button. Wait until the power indicator light starts blinking (indicating that the computer is in sleep) before you move your computer. Moving your computer while the hard disk is spinning may cause damage or loss of data. Shut Down Your computer should be shut down when not in use for 24 hours or more. Enter the Start menu and select Shut Down to turn off the computer. Page 14 Coby Electronics Corporation Basic Operation Basic Operation Keyboard Functions Your computer’s standard keyboard incorporates a numeric keypad and function keys. Numeric Keypad When enabled, the keys indicated below can be used as a 10-key numeric keypad. To enable or disable the numeric keypad, press Fn+Ins/ NumLk. Function Key Combinations The function keys allow you to change your computer’s operating features instantly. See below for more information on using function key combinations. English Key Description Fn + Esc Put your computer in sleep mode. Fn + F1 Enable/disable the built-in wireless internet. Fn + F3 Mute. Fn + F4 Enable/disable the touch pad. Fn + F5 Shift to other connected display devices, i.e. another monitor. Fn + F6 Decrease display brightness. Fn + F7 Increase display brightness. Fn + F8 Decrease computer volume. Fn + F9 Increase computer volume. Fn + F10 Turn on/off the LCD screen. Fn + Ins/NumLk Enable/disable the Numeric keypad. Page 15 Basic Operation Basic Operation English Using the Touchpad Use the touchpad and integrated mouse to navigate your computer’s operating system. To move the cursor on the screen, slide your fingertip over the touchpad in the direction in which you want the cursor to move. Use the left/right click buttons on the integrated mouse just a...


Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias