Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
After rebooting system, the Memory Reset item will set to ‘No’ automatically. (Default setting) ..No Disable this function. • .......... Extend RAM Step ..Enabled Enable test extended memroy process. ..Disabled Disable this function. (Default setting) 34 BIOS Setup PCI Configuration Figure 2-2: PCI Configuration • ..........Embedded NIC .. Onboard LAN Control ..Enabled Enable onboard LAN device. (Default setting) ..Disabled Disable this function. .. Option ROM Scan ..Enabled Enableing this item to initialize device expansion ROM. ..Disabled Disable this function. (Defualt setting) • ..........PCI Slot 1/2 Option ROM ..Enabled Enableing this item to initialize device expansion ROM. (Defualt setting) ..Disabled Disable this function. 35 GS-R115V-RH/GS-R115L-RH Rack Mount Server SIO ITE8718F Configuration Figure 2-3: SIO ITE8718F Configuration 36 BIOS Setup • ..........Serial Port A This allows users to configure serial prot A by using this option. ..Enabled Enable the configuration (Default setting) ..Disabled Disable the configuration. .. Base I/O Address/IRQ ..3F8 Set IO address to 3F8. (Default setting) ..2F8 Set IO address to 2F8. ..3E8 Set IO address to 3E8. ..2E8 Set IO address to 2E8. • ..........Serial Port B This allows users to configure serial prot B by using this option. ..Enabled Enable the configuration ..Disabled Disable the configuration.(Default setting) .. Base I/O Address/IRQ ..3F8 Set IO address to 3F8. ..2F8 Set IO address to 2F8. (Default setting) ..3E8 Set IO address to 3E8. ..2E8 Set IO address to 2E8. .. Base I/O Address ..378 Set IO address to 378 ..278 Set IO address to 278. .. Iterrupt ..IRQ5 Set Interrupt as IRQ5. (Default setting) ..IRQ7 Set Interrupt as IRQ7. (Default setting) 37 GS-R115V-RH/GS-R115L-RH Rack Mount Server • ..........PS/2 Mouse Set this option ‘Enabled’ to allow BIOS support for a PS/2 - type mouse. ..Enabled ‘Enabled’ forces the PS/2 mouse port to be enabled regardless if a mouse is present. (Default setting) ..Disabled ‘Disabled’ prevents any installed PS/2 mouse from functioning, but frees up IRQ12. • .......... USB Controller This item allows users to enable or disable the USB device by setting item to the desired value. ..Enabled Enable USB controller. (Default setting) ..Disabled Disbale this function. • ..........USB 2.0 Controller This item allows users to enable or disable the USB 2.0 device by setting item to the desired value. ..Enabled Enable USB 2.0 controller. ..Disabled Disbale this function. (Default setting) • ..........Legacy USB Support This option allows user to function support for legacy USB. ..Enabled Enables support for legacy USB (Default setting) ..Disabled Disables support for legacy USB • ..........Route Port 80h cycles to Set route port 80h cycles to either PCI or LPC bus. ..PCI Set Route Port 80h I/O cycles to the PCI bus. (Default setting) ..LPC Set Route Port 80h I/O cycles to the LPC bus. 38 BIOS Setup • .......... Parallel ATA ..Enabled ..Disabled Enable Parallel ATA. (Default setting) Disable the device. • .......... Serial ATA ..Enabled ..Disabled Enables on-board serial ATA function. (Default setting) Disables on-board serial ATA function. .. Native Mode Operation This option allows user to set the native mode for Serial ATA function. ..Auto Auto detected. (Default setting) ..Serial ATA Set Native mode to Serial ATA. .. SATA Controller Mode Option ..Compatible Mode SATA and PATA drives are auto-detected and placed in Legacy mode. (Default setting) ..Enhanced Mode SATA and PATA drives are auto-detected and placed in Native mode. Note: Pre-Win2000 operating system do not work in Enhanced mode. .. SATA AHCI Enable ..Enabled Set this item to enable SATA AHCI function for WinXP-SP1+IAA driver supports AHCI mode. ..Disabled Disabled this function. .. SATA RAID Enable ..Enabled Enabled SATA RAID function. ..Disabled Disable this function. 39 GS-R115V-RH/GS-R115L-RH Rack Mount Server BIOS Setup Advanced Chipset Control Figure 2-4: Advanced Chipset Control • ..........Enable MultimediaTimer ..Yes Enable Multimedia Timer support. ..No Disable this function. (Default setting) 41 BIOS Setup Hardware Monitor Figure 2-5: Hardware Monitor • ..........Voltage Monitor: DDR1V8, VCC3, VCORE, 12V1, VCC1V5, VBAT ..Detect system's voltage status automatically. • ..........FAN Monitor: UF 1/2/3/4/5 (RPM) ..Display the current System 1/2/34 and CPU fan speed. This Menu will disappear when BMC module is populated. 42 BIOS Setup • ..........Boot -time Diagnostic When this item is enabled, system will shows Diagnostic status when system boot. .. Enabled Enable Boot-time Diagnostic. .. Disabled Disable this function. (Default value) • ..........Reset Configuration Data ..Yes Reset all configuration data. ..No Do not make any changes. (Default value) • ..........NumLock This option allows user to select power-on state for NumLock. .. On Enable NumLock. .. Off Disable this function. 43 BIOS Setup • ..........Memory Processor Error When Boot is selected, th...