Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer). NOTE: The appearance of the system board may vary based on your computer model. 1 memory module(s) 2 processor heat-sink 3 MXM-assembly heat sink 4 MXM-assembly fan 5 converter card 6 processor heat-sink fan 7 touch screen control card 8 optical drive 9 middle frame 10 hard-drive assembly 11 system board Inspiron One 2310 1 TV tuner card slot (TV TUNER) 2 SATA connector (ODD) 3 touch-screen cable connector (Touch) 4 Mini-Card slot (WLAN\COMBO) 5 Bluetooth cable connector (BT) 6 display cable connector (when both MXM card and audio video card are present) (AV IN_MXM) 7 display cable connector (when only MXM card is present) (LVDS_MXM) 8 MXM-assembly connector 9 display cable connector (when only audio video card is present) (AV IN_NB) 10 display cable connector (when both MXM card and audio video card are absent) (LVDS_NB) 11 processor socket 12 MXM-fan cable connector (MXM FAN) 13 processor heat-sink fan cable connector (CPU FAN) 14 memory-module connector (CHADIMM) 15 memory-module connector (CHB-DIMM) 16 battery socket (BT1) 17 password jumper (CLR_PSWD) 18 CMOS jumper (CLR_CMOS) 19 converter-card cable connector 20 optical-drive power cable connector (ODD PWR) 21 hard-drive power cable connector (HDD PWR) 22 SATA connector (HDD) 23 infrared cable connector (CIR Receiver) 24 infrared blaster cable connector (CIR Emitter) 25 camera cable connector (CN 25) 26 speaker cable connector (CN 10) Back to Contents Page 1 TV tuner card slot (TV TUNER) 2 Mini-Card slot (WLAN\COMBO) 3 CMOS jumper (CLR_CMOS) 4 password jumper (CLR_PSWD) 5 SATA drive connector (SATA 1) 6 SATA drive connector (SATA 0) 7 display cable connector (when both MXM card and audio video card are present) (AVIN_MXM) 8 display cable connector (when only MXM card is present) (LVDS_MXM) 9 display cable connector (when only audio video card is present) (AVIN_UMA) 10 display cable connector (when both MXM card and audio video card are absent) (LVDS_UMA) 11 MXM-assembly connector 12 processor socket 13 MXM-fan connector (MXM FAN) 14 processor heat-sink fan connector (CPU FAN) 15 memory-module connector 16 memory-module connector 17 hard-drive power cable connector (HDD PWR) 18 optical-drive power cable connector (ODD PWR) 19 camera cable connector 20 Bluetooth cable connector (BT) 21 converter-card cable connector 22 infrared blaster cable connector 23 infrared cable connector 24 touch-screen cable connector (Touch) 25 battery socket (BT1) 26 speaker cable connector Back to Contents Page Dell™ Inspiron™ One 2305/2310 Service Manual Information in this document is subject to change without notice. © 2010 Dell Inc. All rights reserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell, the DELL logo, and Inspiron are trademarks of Dell Inc.; Bluetooth is a registered trademark owned by Bluetooth SIG, Inc. and is used by Dell under license; Microsoft, Windows, and the Windows start button logo are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own. August 2010 Rev. A00 Back to Contents Page NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Back to Contents Page Antenna-In Connector Dell™ Inspiron™ One 2305/2310 Service Manual Removing the Antenna-In Connector Replacing the Antenna-In Connector Removing the Antenna-In Connector 1. Follow the instructions in Before You Begin. 2. Remove the back cover (see Removing the Back Cover). 3. Follow the instructions from step 2 to step 5 in Removing the Front Stand. 4. Follow the instructions from step 4 to step 8 in Removing the System-Board Shield. 5. Remove the hex nut that secures the antenna-in connector to the system-board shield. 6. Release the antenna-in connector from the slot on the system-board shield. 7. Lift the antenna-in connector along with its cable away from the system-board shield. Replacing the Antenna-In Connector 1. Follow the instructions in Before You Begin. 2. Slide the antenna-in connector into the slot on the system-board shield. 3. Replace the hex nut that secures the antenna-in connector to the system-board shield. 4. Follow the instructions from step 4 to step 8 in Replacing the System-Board Shield. 5. Follow the instructions from step 4 to step 5 in Rep...