Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
3. Remove the cover. 4. Remove the cooling shroud. 5. Remove the optical drive. 6. Remove the hard drive carrier. 7. Remove the hard-drive assembly. 8. Remove the SAS Backplane. 9. Remove the power supply. 10. Remove the control panel. 11. Remove the system fans. 12. Remove the removable fan bracket. 13. Remove the expansion card cages. 14. Remove the power distribution unit. 15. Lift the release tab upwards and gently slide the center riser board towards the right. 16. Lift the center riser board up and away from the computer. Related Links Installing the Center Riser Board Installing the Center Riser Board 1. Place the center riser board on the computer. 2. Slide the center riser board into place and press the release tab downwards. 3. Install the power distribution unit. 4. Install the card cages. 5. Install the fan bracket. 6. Install the system fans. 7. Install the control panel. 8. Install the power supply. 9. Install the SAS backplane. 10. Install the hard drive assembly. 11. Install the hard-drive carrier. 12. Install the optical drive. 13. Install the cooling shroud. 14. Install the cover. 15. Install the front bezel. 16. Follow the procedures in After Working Inside Your Computer. Related Links Removing the Center Riser Board 16 CMOS Battery Removing the CMOS Battery 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the front bezel. 3. Remove the cover. 4. Remove the cooling shroud. 5. Remove the optical drive. 6. Remove the hard drive carrier. 7. Remove the hard-drive assembly. 8. Remove the SAS Backplane. 9. Remove the power supply. 10. Remove the control panel. 11. Remove the system fans. 12. Remove the removable fan bracket. 13. Remove the expansion card cages. 14. Remove the power distribution unit. 15. Remove the center riser board. 16. Disconnect cables leading to the power distribution unit. 17. Press the coin-cell battery inward to allow the battery to pop up from the socket. (power distribution unit removed for visibility purposes) 18. Lift the coin-cell battery out of the system and properly dispose of the battery. Related Links Installing the CMOS Battery Installing the CMOS Battery 1. Fix the coin-cell battery in the socket of the computer. 2. Connect the cables leading to the power distribution unit. 3. Install the center riser board. 4. Install the power distribution unit. 5. Install the card cages. 6. Install the fan bracket. 7. Install the system fans. 8. Install the control panel. 9. Install the power supply. 10. Install the SAS backplane. 11. Install the hard drive assembly. 12. Install the hard drive carrier. 13. Install the optical drive. 14. Install the cooling shroud. 15. Install the cover. 16. Install the front bezel. 17. Follow the procedures in After Working Inside Your Computer. Related Links Removing the CMOS Battery 17 Video Card Removing the Video Card 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the front bezel. 3. Remove the cover. 4. Remove the cooling shroud. 5. Remove the optical drive. 6. Remove the hard drive carrier. 7. Remove the hard-drive assembly. 8. Remove the SAS Backplane. 9. Remove the power supply. 10. Remove the control panel. 11. Remove the system fans. 12. Remove the removable fan bracket. 13. Remove the expansion card cages. 14. Remove the power distribution unit. 15. Remove the center riser board. 16. Remove the CMOS battery. 17. Press the release latch to unsecure the video card. 18. Press the release tab in the direction shown by (1) and carefully lift the video card up and away from the computer as shown by direction marked (2). Related Links Installing the Video Card Installing the Video Card 1. Insert the video card in the slot provided until it clicks into place. 2. Press the release latch to secure the video card. 3. Install the CMOS battery. 4. Install the center riser board. 5. Install the power distribution unit. 6. Install the card cages. 7. Install the fan bracket. 8. Install the system fans. 9. Install the control panel. 10. Install the power supply. 11. Install the SAS backplane. 12. Install the hard drive assembly. 13. Install the hard drive carrier. 14. Install the optical drive. 15. Install the cooling shroud. 16. Install the cover. 17. Install the front bezel. 18. Follow the procedures in After Working Inside Your Computer. Related Links Removing the Video Card 18 SAS Controller Card Removing the SAS Controller Card 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the front bezel. 3. Remove the cover. 4. Remove the cooling shroud. 5. Remove the optical drive. 6. Remove the hard drive carrier. 7. Remove the hard-drive assembly. 8. Remove the SAS Backplane. 9. Remove the power supply. 10. Remove the control panel. 11. Remove the system fans. 12. Remove the removable fan bracket. 13. Remove the expansion card cages. 14. Remove the power distribution unit. 15. Remove the center riser board. 16. Remove the CMOS battery. 17. Remove the video card. 18. Pre...