Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
SATA 2 Displays the SATA 2 drive integrated in the computer SATA 3 Displays the SATA 3 drive integrated in the computer. SATA 4 Displays the SATA 4 drive integrated in the computer. Standard CMOS Features SATA 5 Displays the SATA 5 drive integrated in the computer SATA 6 Displays the SATA 6 drive integrated in the computer. Wait for ‘F1’ If Errors If enabled, the system will HALT during boot to display system errors. Advanced BIOS Features NumLock Status Select power-on state for num-lock. ACPI APIC support Include ACPI APIC table pointer to RSDT pointer list. OptionROM Display Screen Allows you to enable or disable the RAID Option ROM screen during POST. Boot Configuration Features 1st Boot Device Displays the first boot device. 2nd Boot Device Displays the second boot device. Hard Disk Drives Sets the hard drive boot priority. The items displayed are dynamically updated according to the hard drives detected. CD/DVD Drives Sets the CD/DVD drive boot priority. CPU Configuration XD Bit Capability Enable XD Bit Capability to allow the processor to distinguish between the bits of code that can be executed and the ones that cannot be executed. Intel® Speedstep™ tech If enabled, the processor clock speed and core voltage are adjusted dynamically based on the processor load. Intel® C State Tech If enabled, C State: Processor idle is set to C2/C3/C4. Intel® HT Technology (available on Aurora-R2 only) If disabled only one thread per enabled core is active. Integrated Devices USB Functions Allows you to enable or disable the integrated USB controller. HD Audio Controller Allows you to enable or disable the integrated audio controller. Onboard IEEE1394 Controller Allows you to enable or disable the onboard IEEE 1394 controller. LAN1 BCM5784 Device (available on Aurora and Aurora ALX only) Allows you to enable or disable the onboard LAN controller. Onboard LAN Controller (available on Aurora-R2 only) Allows you to enable or disable the onboard LAN controller. LAN1 Option ROM (available on Aurora and Aurora ALX only) Allows you to enable and disable the network controller’s boot option. Onboard LAN Boot ROM (available on Aurora-R2 only) Allows you to enable and disable the network controller’s boot option. SiL3132 E-Sata Device (available on Aurora and Aurora ALX only) Allows you to enable and disable the e-SATA controller. JMicron-362 E-SATA Device (available on Aurora-R2 only) Allows you to enable and disable the e-SATA controller. Integrated Devices Configure SATA#1-6 as (available on Aurora and Aurora ALX only) Allows you to configure the integrated hard drive controller to AHCI or RAID. SATA Mode (available on Aurora-R2 only) Allows you to configure the integrated hard drive controller to AHCI or RAID. AHCI CD/DVD Boot Time out Allows you to set the wait time for SATA or CD/DVD in AHCI mode. Power Management Setup Suspend Mode Sets the energy-saving mode of the ACPI function. AC Recovery Sets what action the computer takes when power is restored. Remote Wakeup (available on Aurora and Aurora ALX only) Sets the system to wake up from an onboard LAN, PCIE-X1 LAN card, or a PCI LAN card. Auto Power On Allows the computer to start up at a certain time. Frequency/Voltage Control CPU Speed Displays the current processor speed. Memory Speed Displays the current memory speed. Current QPI Speed (available on Aurora and Aurora ALX only) Displays current QPI speed. Current DMI Speed (available on Aurora-R2 only) Displays current DMI speed. QPI Frequency (available on Aurora and Aurora ALX only) Allows you to change the QPI frequency. DMI Frequency (available on Aurora-R2 only) Allows you to change the DMI frequency. Memory Ratio Allows you to change the memory ratio. Core (Non-Turbo) Ratio Displays the ratio between the processor core clock and the FSB frequency. Advance DRAM Configuration Allows you to access the advance DRAM configuration submenu Overclock Configuration Allows you to access the overclock configuration submenu Frequency/Voltage Control Overvoltage Configuration Allows you to access the overvoltage configuration submenu Load Level1 OC Setting Allows you to restore the Level 1 overclocking settings that were shipped from the factory (only displayed with an XE processor). Advance DRAM Configuration Submenu Memory-Z Opens submenu to display the SPD configuration for each memory module. Advanced Memory Settings Allows you to toggle to Manual mode and set all of the timing parameters. tCL Displays the Column Address Strobe Latency (editable in Manual Mode). tRCD Displays timing of RAS to CAS delay (editable in Manual Mode). tRP Displays timing of RAS Precharge (editable in Manual Mode). tRAS Displays timing of Row Address Strobe (editable in Manual Mode). Advance DRAM Configuration Submenu tRFC Displays timing of Refresh to Archive/ Refresh cycle time (editable in Manual Mode). tWR Displays timing of Write Recover (editable in Manual Mode). tWTR Displays Write to Read delay (editable in Manual Mode). tRRD Display...