Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Computadores - VGC-RA204 (353.11 kb)
Computadores - VGC-RA204 (1.5 mb)
Facilidade de uso
3To completely disconnect power to the Network Media Receiver, unplug the AC adapter. The Network Media Receiver goes into Standby mode and the Standby indicator light is red ( dimmed) . The VAIO computer does not resume from Standby or Hibernate mode . Make sure the computer, server and network settings are configured correctly. . Check the following, if applicable to your connection environment: . A crossover cable is securely connected between the Network Media Receiver and a single VAIO computer. . The network switch or the router device is turned on ( see the information supplied with your network switch or router device for details) . . The router device is turned on before turning on the Network Media Receiver. . The Network Media Receiver, network switch, or router device are properly connected using the appropriate network cables* . . If using a router device, the Network Media Receiver and the VAIO computer have been configured to obtain the IP address automatically. . Verify that the correct server name appears in the Select a server screen ( the Select a server screen lists all current and previous servers connected to the Network Media Receiver) . . When connecting to the Network Media Receiver for the first time, the Network Media Receiver does not automatically bring a VAIO computer out of Standby mode. Subsequent connections bring your VAIO computer out of Standby mode. . The Network Media Receiver cannot automatically resume the functions of certain VAIO computers due to computer settings or the network environment. The automatic resume feature is not available for VAIO notebook computer models or for VAIO computers that use a wireless LAN connection. This Resume feature is available for wired networks only. * Use network cables that support 100BASE- TX/ 10BASE-T. . The connected server history is lost when the AC power cable is disconnected. All settings except for the IP address are lost. About the remote control The remote control does not control TV functions . Make sure your TV is compatible. The remote control does not work with all TV models. . Make sure the fresh batteries are properly installed in the remote control. . Make sure the correct TV manufacturer code is set for the remote control. . When you replace the batteries in the remote control, reset the TV manufacturer code again. About visual and audio reception There is nothing displayed on the TV screen If your VAIO computer has become unstable and stops responding, turn it off and restart the computer. Check the following: . The TV set is turned on and the power indicator light is on. . The Network Media Receiver is turned on and the power indicator light is on. . The Network Media Receiver and the TV are connected properly. . The TV is connected to the Network Media Receiver, using the video/ S-video-in jack. . The TV is set to the correct ch...