Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Information in this document is subject to change without notice. © 2006–2009 Dell Inc. All rights reserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell, the DELL logo, and PowerEdge are trademarks of Dell Inc.; Intel and Xeon are registered trademarks of Intel Corporation; Microsoft, Windows, and Windows Server and are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries; Red Hat and Red Hat Enterprise Linux are registered trademarks of Red Hat, Inc.; SUSE is a registered trademark of Novell Inc. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own. October 2009 P/N DD259 Rev. A07 Contents Non-Optimal Memory Configurations . . . . . . . . . . . 5 PowerEdge 2950 III – New System Features . . . . . . . 5 New Performance Features . . . . . . . . . . . . . 5 New High-Efficiency Power Supply and Power Monitoring Features . . . . . . . . . . . 5 New I/O and Storage Features . . . . . . . . . . . . 6 New Security Features . . . . . . . . . . . . . . . . 6 Optional Internal USB Memory Key . . . . . . . . . . . . 6 Installing the Optional Internal USB Memory Key . . . . . . . . . . . . . . . . . . . 7 Support for 8-GB Memory Modules – PowerEdge 2950 III Systems . . . . . . . . . . . . . . . . 9 Processor Upgrades – Power 2950 II and PowerEdge 2950 III Systems . . . . . . . . . . . . . 9 System Board Replacement – Safeguarding Encrypted Data . . . . . . . . . . . . . . . 9 System Message Update. . . . . . . . . . . . . . . . . 10 LCD Status Messages Update . . . . . . . . . . . . . . 15 Contents System Setup Program Update. . . . . . . . . . . . . . 19 Memory Screen . . . . . . . . . . . . . . . . . . . 19 CPU Information Screen . . . . . . . . . . . . . . 20 Integrated Devices Screen . . . . . . . . . . . . . 20 System Security Screen . . . . . . . . . . . . . . 21 Serial Communication Screen . . . . . . . . . . . 23 Operating System Information . . . . . . . . . . . . . . 23 Enumeration of NICs . . . . . . . . . . . . . . . . 23 RHEL – Incorrect Processor Information . . . . . . 23 System Support for Microsoft Windows 2000 . . . 24 System Diagnostics Update . . . . . . . . . . . . . . . 24 Contents Non-Optimal Memory Configurations The POST may halt when a non-optimal memory configuration is detected and the following message is displayed: Non-Optimal Memory Configuration Press F1 to continue or F2 for Setup NOTE: Mixing DIMMs of different speeds renders the memory configuration non-optimal. The system clocks down the performance to the slowest speed in the DIMM set for the channel. PowerEdge 2950 III – New System Features New Performance Features • Two dual-core or quad-core Intel® Xeon® 5400 Series and 5300 Series processors. • 8-GB memory module support. New High-Efficiency Power Supply and Power Monitoring Features • Higher system efficiency on power conversion across workloads. • Baseboard Management Control (BMC) power monitoring monitors current, voltage, and power utilization in the system. Information Update New I/O and Storage Features • Optional Intel quad-port Gigabit Ethernet NIC, capable of supporting 10-Mbps, 100-Mbps, and 1000-Mbps data rates, and iSCSI remote boot. • Support for 10-Gb Ethernet cards. • One internal USB 2.0-compliant connector supporting an optional bootable USB flash drive or USB memory key. • Support for optional SAS 6i/R and PERC 6/i adapters. New Security Features • Trusted Program Module (TPM) support for improved security. • Optional support for iSCSI boot. Optional Internal USB Memory Key The system provides an internal USB connector located on the sideplane board for use with a USB flash memory key. The USB memory key can be used as a boot device, security key, or mass storage device. To use the internal USB connector, the Internal USB Port option must be enabled in the Integrated Devices screen of the System Setup program. See "Integrated Devices Screen" on page 20. To boot from the USB memory key, you must configure the USB memory key with a boot image and then specify the USB memory key in the boot sequence in the System Setup program. See “Using the System Setup Program” in the Hardware Owner’s Manual. For information on creating a bootable file on the USB memory key, see the user documentation that accompanied the USB memory key. NOTE: USB keys that contain multiple LUNs (Logical Unit Numbers) must be formatted using the format utility provided by the key manufacturer. CAUTION: To avoid interference with components inside the...