Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
•
Intel Itanium 2 nPartitions (and PA-RISC nPartitions) can be managed by Partition Manager
on the Support Management Station (SMS)
•
Intel Itanium 2 nPartitions (and PA-RISC nPartitions) can be managed by nPartition
Commands on any nPartition
•
Intel Itanium 2 nPartitions (and PA-RISC nPartitions) can be managed by Partition Manager
on any Intel Itanium 2 nPartition
Limitation with iCAP on HP-UX 11i v1 December 2004 Release with PDC 22.1 and IPF 2.50/2.52
To correctly determine the state of the machine and administer iCAP, the iCAP software requires
cell information for all cells in the server. The PDC 22.1 and IPF 2.50/2.52 firmware does not
properly report cell information back to the nPartition Provider on PA-RISC nPartitions running
HP-UX 11i v1. The iCAP software running in such an environment cannot properly manage
iCAP processors in all nPartitions. If you depend on iCAP on a Superdome hybrid server, you
must install firmware (PDC 22.3 and IPF 3.66 or later) and upgrade the nPartition Provider
(B.11.11.01.04 or later).
Limitation with WLM and gWLM on HP-UX 11i v1 December 2004 Release with PDC 22.1 and
IPF 2.50/2.52
WLM and gWLM depend on iCAP for system configuration information. This is the case whether
or not there are any iCAP components in the system. The iCAP software does not work properly
on PA-RISC nPartitions running HP-UX 11i v1 with the PDC 22.1 and IPF 2.50/2.52 firmware.
Because WLM and gWLM are dependent on iCAP, in this situation they cannot perform processor
migrations among virtual partitions or nPartitions in the PA-RISC nPartitions running HP-UX
11i v1. Other WLM and gWLM functionality (such as Psets) works properly. If you depend on
the processor migration features of WLM and gWLM on a Superdome hybrid server, you must
install firmware (PDC 22.3 and IPF 3.66 or later) and upgrade the nPartition Provider (B.11.11.01.04
or later).
Mixing Scenario 3: Superdome with Both HP-UX 11i v1 PA-RISC and HP-UX 11i v2 PA-RISC
nPartitions
Table 1-5 lists the minimum required firmware for full functionality of system management tools
on all nPartitions in Superdome hybrid servers with both HP-UX 11i v1 and HP-UX 11i v2
PA-RISC nPartitions.
For critical details about updating firmware, see “HP Recommends All Firmware Components
Be Updated to the Specified Revision” (page 5).
Table 1-5 Firmware Requirements for Both HP-UX 11i v1 PA-RISC and HP-UX 11i v2 PA-RISC
nPartitions
Processor
Minimum Required Firmware
PA-8800, PA-8900 (with HP-UX 11i v2)
PDC 22.1 (SMS rel_5.0)
PA-8800, PA-8900 (with HP-UX 11i v1)
PDC 22.3 (SMS rel_6.0)
Intel Itanium 2 single-core processor with 9 MB cache IPF 3.66 (SMS rel_6.0) is the minimum requirement for
(A1 stepping and A2 stepping)
HP-UX, Red Hat Enterprise Linux, SuSE Linux Enterprise
Server, and Windows Server 2003
IPF 3.88 (SMS rel_6.1) is the minimum requirement for
OpenVMS I64
If it is not possible to upgrade the firmware in the PA-RISC HP-UX 11i v1 nPartitions to PDC
22.3 then the limitations and workarounds in scenario 2 apply (see “Mixing Scenario 2: Superdome
with Only HP-UX 11i v1 on PA-RISC nPartitions” (page 8)).
HP Superdome Hybrid Servers with Mixed Intel Itanium 2 and PA-RISC nPartitions
9
... Este manual também é adequado para os modelos :
Computadores - HP Integrity Superdome sx1000 Server (192.42 kb)
Computadores - HP Integrity Superdome sx2000 Server (192.42 kb)