Log:
Assessments - 0, GPA: 0 ( )

Instruções de Operação HP, Modelo HP NetServer LC 3

Fabricante : HP
Arquivo Tamanho: 529.01 kb
Arquivo Nome :
Língua de Ensino: en
Ir para baixar



por este dispositivo também tem outras instruções :

Facilidade de uso


2. creating image files
Image files may be created locally or via a LAN connection.
locally:
• You need a FAT partition on the same disk or another (at least 400MB, for the image of
a basic installation)
• Create a disk to boot under DOS and set up the SCSI connection of the disk(s) (see
refer to software
sample in Disk 0 files). You can copy the PQDI programs to this disk if you have not
scripts: \\Disk 0
already done so.
• On the source machine (from which you wish to create an image), boot on the bootable
disk just created and launch PQDI
• Select “Create Image”, follow the steps.
• Before launching the creation, select the advanced options, and deselect the option
“check errors”.
• Launch the creation.
via the lan:
• Check the connectivity between the machines (ping) and the type of LAN card you use.
On the disk sample, there is the driver of the HP D5013A (e100b.nif & e100b.dos).
If you have a different card, you will need to use the appropriate drivers.
• On the “file” server (e.g. e800-TTDM), create a shared folder named C:\images\.
The image file will be located here. The PQDI programs (from the “images” folder on the
CD-ROM) should also be placed in this folder.
• Create a disk to boot under DOS and to install the TCP/IP stacks
(see sample in disk 1 files).
• On the disk, edit the file:
refer to software
* Autoexec.bat
scripts: \\Disk 1
- Put the name of the server you want to reach - Set SrvName=e800-TTDM.
- Check that the correct shared file is there:
\images\ - net use I: \\%SrvName%\images
* \net\protocol.ini
- Check the name of your card driver - drivername=e100b$ - You must
retain the $ - For the network setting, please fill in these lines according
to your network This information will only be used during image creation
DefaultGateway0=
SubNetMask0=255 255 255 0
IPAddress0=192 168 100 96
- If you use a DHCP server, please change 1 to 0 (DisableDHCP=1) and
leave the IP address blank
* \net\system.ini
- Check the name of the driver of your card - netcard=e100b.dos
- Complete these lines - username=administrator - and - workgroup=HP-LABS
• On the machine you would like to copy, power off and then boot using the disk you
have just configured.
• Under DOS, type I: then PQDI
• Select the “Create” icon. Locate the image file on the “file” server within the “images”
folder you have just created.
• Before launching the creation, select the advanced options and deselect the “check
errors” option.
• Launch the creation.
3

...

Este manual também é adequado para os modelos :
Computadores - HP NetServer LC 2000 (529.01 kb)
Computadores - HP NetServer LC 2000r (529.01 kb)
Computadores - HP NetServer LC II (529.01 kb)
Computadores - HP NetServer LC Plus (529.01 kb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias