Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Running Setup Using the Boot Monitor
Running Setup Using the Boot Monitor
NOTE: The SA8220 is
At the first use of the SA8220, you must use the Boot Monitor to
not directing traffic when
perform the initial configuration.
the Boot Monitor is in
After entering the initial configuration parameters with the setup
operation.
command and booting, the SA8220 is ready for routine operations
using either the Graphical User Interface (see Chapter 4 in the User
Guide) or the Command Line Interface (see Chapter 5 in the User
Guide).
NOTE: If Autoboot is
1. Type your information as indicated at the prompts. For example:
enabled, you must first
interrupt the bootup
monitor>setup
sequence by pressing a
Enable dual NIC operation (yes, no) [no]
key at the Press any
--->yes
key to stop
Auto configure the Network side NIC speed and
autoboot prompt. In a
duplex? (yes, no) [yes] --->
few seconds, the
Auto configure the Server side NIC speed and
monitor> prompt
duplex? (yes, no) [yes] --->
displays. This confirms
DHCP is disabled for dual NIC operation.
that Boot Monitor is
Enter the hostname you would like to assign to
running. Also, this
the Network NIC --->CSLab7k
document assumes that
Enter the IP Address for the Network side NIC
the SA8220’s serial port
--->10.6.3.21
is in a secure
Enter the IP Address for the Server side NIC
environment and no
--->10.6.5.21
password is required to
Enter the Netmask for the Network side NIC
access the Boot Monitor
--->255.255.255.0
for initial setup and
Enter the Netmask for the Server side NIC
configuration. However,
--->255.255.255.0
after the device is booted
Enter default gateway --->10.6.3.1
using either the boot
Would you like to configure DNS (yes,no)?
command in the Boot
[no] --->
Monitor, or the autoboot
DNS not configured.
function, a password is
Specify failover method (disabled, serial,
required to log on to the
route) [disabled] --->
Command Line Interface.
Enable Autoboot? (yes, no) [no] --->yes
9
... Este manual também é adequado para os modelos :
Computadores - HP e-Commerce Traffic Director sa8220 (67.64 kb)
Computadores - HP Traffic Director sa7200 (67.64 kb)
Computadores - HP Traffic Director sa7220 (67.64 kb)