Assessments - 1, GPA: 4 ( )

Fabricante : Hyundai Arquivo Tamanho: 947.49 kb Arquivo Nome : Língua de Ensino:

• ..........Features of Heating Operation: ~ If there is frost on the outdoor unit, the heating capacity will drop. Therefore, defrosting operates automatically (approx. 5 to 12 minutes) and the indicator light on the indoor unit(s) will blink (red). ~ The room and outdoor fan does operate during defrosting and the unit will not run during this time. • To change the air flow Up or Down Press the Flap button. • Up/Down Moving range of Airflow Direction Control Plate. • Left-right airflow direction is adjusted manually. • As shown in the figure below adjust the left-right airflow direction with the right/left air flow control plate. FAN SPEED, AIR FLOW DIRECTION • To operate the unit(s) effectively, it is recommended that you familiarize yourself with the following functions: • To change the fan speed Press the FAN SPEED button. • Cold air moves down, horizontal air flow is preferred when cooling. • Up/Down Air Flow • Right/Left Air Flow Control Plate Control Plate CIRCULATION MODE • If CIRCULATION mode is selected, the room air is circulated so that the temperature stratification in the room will be reduced. • You can select AUTO, HIGH, MED, or LOW speed. • In the AUTO fan speed, the room temperature, set temperature and the unit temperature are monitored so that the circulation can be properly controlled. ECR International Hyundai Ductless Split System6 mark will blink button. OPERATION (Continued) OPERATION CONDITION TIMER MODE (ON, OFF) mark will blink button. OPERATION (Continued) OPERATION CONDITION TIMER MODE (ON, OFF) • The timer can be set during any mode. Select the timer setting by pressing: ON-TIMER button or OFF-TIMER button. (Example) Time is AM 10:20. Air-conditioner is not in operation. How to start the air conditioner at PM 1:30 and stop it at PM 6:30. mark will blink 1. Press the button. button. Time can also be adjusted by 10-minute intervals by pressing button at center interval. 2. Press button to adjust ON TIMER to PM 1:30 (Time can be adjusted at hour intervals by pressing and holding 3. Press the TIMER button. 4. Press the 5. Press Time can be adjusted at hour intervals by pressing and holding button. Time can also be adjusted by 10-minute intervals by pressing button at center interval. 6. Press the TIMER button. To CANCEL Press the “C” button. Check if current time is set correctly. If current time is not correct, timer will not operate at desired time. button to adjust OFF TIMER to PM 6:30 • Operation Temperature Range: HYUNDAI OPERATING RANGES Mode Temperature (°F) Indoor Humidity Indoor Outdoor Cool 70-90 70-109 <80% Dry 59-90 59-109 <80% Heat 59-81 32-75 <80% • If you operate the unit(s) at other than the above conditions, a safety device may be activated and shut off the power. • On humid days, frost may form on the surface of air conditioner or condensation may occur. HIGH POWER MODE Convenient on a hot day. (During AUTO, HEAT, COOL or DRY mode) Press the HIGH POWER To CANCEL: Press the HIGH POWER but- button. ton on...

Baixe o seu

Para fazer o download, introduza 2 dígitos :