Assessments - 2, GPA: 4.5 ( )

Fabricante : Admiral Arquivo Tamanho: 5.71 mb Arquivo Nome : Língua de Ensino:

When the air conditioner is heating, allow 3 minutes after you press this button. NOTE: After setting the mode, allow 3 minutes before switching to another mode. In the FAN ONLY Mode, Room Temperature display range is from 0 (32 ) to 38 (99 ). Room Temperature below 32 ,the Temperature display L0. Room Temperature above 99 ,the Temperature display H1. Operating Instructions Remote control 1 2 3 4 7 Power Mode +_ Temp/Time Auto Power Saver Mid High Low Timer Fan Speed 1 2 3 8 5 6 84 5 6 7 9 9 Power BUTTON The appliance will be started when it is energized or will be stopped when it is in operation, if you press this button. Mode BUTTON Used to select the operation mode. BUTTONS Used to set room temperature in Cooling mode or used to set time in Timer mode. High BUTTON Used to select the high fan speed mode. Mid BUTTON Used to select the Mid fan speed mode. Low BUTTON Used to select the Low fan speed mode. Auto BUTTON Used to select the Auto fan speed mode. Timer BUTTON Used to set or cancel timer operation. Power Saver BUTTON Used to select the Energy-saving mode. When changing modes during operation, sometimes the unit does not always respond at once. Wait 3 minutes. Wait 3 minutes before restarting the appliance. 13 F HR FAN SPEED MODEOFFON/ TIMER Airconditioner WAIT THREE MINUTES BEFORE RESTARTING How to Insert the Batteries How to Use Remove the battery cover according to the arrow direction. Insert new batteries making sure that the (+) and (-) of battery are matched correctly. Reattach the cover by sliding it back into position. Note: Use 2 LR06 AA(1.5volt) batteries. Do not use rechargeable batteries. Replace batteries with new ones of the same type when the display becomes dim. To operate the room air conditioner, aim the remote control to the signal receptor. The remote control will operate the air conditioner at a distance of up to 23 feet when pointing at signal receptor of unit. Signal receptor Remote control Operating Instructions 14 If the replacement is done within 1 minute, the remote control will keep original presetting. (This function only for LCD remote control) When servicing the air conditioner, be sure to turn the mode switch to the "OFF" position and disconnect the power cord from the electrical outlet. 1. DO NOT use gasoline, benzine, thinner or other chemicals on the air conditioner as these substances may cause damage to the paint finish and deformation of plastic parts. 2. Never attempt to pour water directly in front of the unit as this will cause deterioration of the electrical insulation. Cleaning the Air Filter Removal of Air Filter If the air filter becomes clogged with dust, air-flow is obstructed and reduces efficiency. The air filter should be cleaned once a month. More frequent cleaning may be necessary depending on outdoor and indoor air quality. Air Filter Removal: The air filter on the above model is located behind the air intake front grill. To remove the air filter, open the air inlet grille and take the a...

Baixe o seu

Para fazer o download, introduza 2 dígitos :