Assessments - 4, GPA: 3.5 ( )

Fabricante : Panasonic Arquivo Tamanho: 7.79 mb Arquivo Nome : Língua de Ensino:

This will give you a cooling environment, e.g. when you return from work or wake up. • When the ON timer is set, operation will start 15 minutes before the actual set time in cooling operation and 30 minutes in heating operation. • Use the OFF timer to stop the air conditioner operation at the desired time. This can save electricity while you are going out or sleeping. • The timer indicator of the indoor unit will light up during the timer operation. • If you press operation button during the timer setting operation, timer setting will be cancelled. • When a power failure occurs, the timer setting will be cancelled. Once power is resumed, reset the timer. Hints ¦ Temperature setting of 1°C higher in cool mode or 2°C lower in heat mode than the desired temperature performs a 10% power saving. ¦ To reduce power consumption during cool mode, close the curtains to prevent the sunlight and heat from coming in. . To turn off the air conditioner, press . Care & Cleaning Switch off the power supply before cleaning AIR FILTER AIR FILTER Vacuum, wash and dry. • It is recommended to clean air filters once every 2 weeks. • Wash/rinse the filters gently with water to avoid damage to the filter surface. • Dry the filters thoroughly under the shade, away from fire or direct sunlight. • Replace any damaged filter. Part no.: CWD001110 AirQuality AirQuality tImEr POwEr INDOOR UNIT INDOOR UNIT Wipe the unit gently with a soft, dry cloth. FRONT PANEL FRONT PANEL Remove Raise and pull to remove. Wash and dry. AIRFLOW DIRECTION LOUVER AIRFLOW DIRECTION LOUVER AUTO OFF/ON B UTTON AUTO OFF/ON B UTTON If the remote control is misplaced or malfunctioned. Step Action Mode 1 Press once Automatic 2 Press and hold until you hear one beep, then release Force Cooling • To turn off, press the AUTO OFF/ ON button again. To switch off the remote control signal receiving sound, press the button and hold for approximate 10 seconds until double beep sound is heard, then release. • Repeat the above step if you want to switch on the signal receiving sound. To switch off the auto restart control, press the button and hold for approximate 15 seconds until triple beep sound is heard, then release. • To switch on the auto restart control, repeat the above step. Hints ¦ Clean the filter regularly for best performance and to reduce power consumption. ¦ Please consult your nearest dealer for seasonal inspection. Washing Instructions • Do not use benzene, thinner or scouring powder. • Use only soap ( pH7) or neutral household detergent. • Do not use water hotter than 40°C. Trou bleshoting The following symptoms do not indicate malfunction. Symptom Cause Mist emerges from indoor unit. ¦ Condensation effect due to cooling process. Water flowing sound during operations. ¦ Refrigerant flow inside the unit. The room has a peculiar odour. ¦ This may due to damp smell emitted by the wall, carpet, furniture or clothing. Indoor fan stops occasionally during automatic fan speed setting. ¦ This helps to ...

Baixe o seu

Para fazer o download, introduza 2 dígitos :