Assessments - 1, GPA: 3
(
)
)
|
por este dispositivo também tem outras instruções :
Aparelhos de ar condicionado - AQ07A4ME (782.4 kb)
Facilidade de uso
If necessary, press the (On/Off) button. Result: The 5 Way indicator on the indoor unit lights up. . The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps. If the is not displayed at the top of the remote control, press the MODE button on the remote control one or more times until it appears. Result: The indoor unit beeps each time you press the MODE button. The air conditioner runs in FAN mode. The temperature is set automatically. N NNNNo oooot tttte eeee You can change modes at any time. Select the fan speed by pressing the FAN button one or more times until the required setting is displayed: Low Medium High Result: Each time you press the FAN button, the indoor unit beeps. To control the direction of the air flow, refer to page 16 and 17. E-15 ENGLISH E-16 Adjusting the Air Flow Direction Vertically Depending on the position of the indoor unit on the wall of your room, you can adjust the position of the outer air flow blade on the bottom of the unit, thus increasing the efficiency of the air conditioner. 1 Press the SWING button one or more times as required. Result: The outer blade is adjusted vertically. RECOMMENDATION When... Adjust the blade to face... Cooling Upwards. Heating Downwards. 2 If you want the blade to move up and down automatically when the air conditioner is operating, press the SWING button. Result: The blade move up and down, around the base position set. 3 To stop the blade moving up and down, press the SWING button again. N NNNNo oooot tttte eeee If you switch the air conditioner... Then the blade is... Off Closed completely. On again Set to the initial position powered. Adjusting the Air Flow Direction Horizontally There are two sets of inner air flow blades. Just as the outer air flow blade can be adjusted vertically, the inner blades can be adjusted horizontally. 1 Adjust each set of inner blades to the required position, by pushing or pulling them sideways. E-17 ENGLISH E-18 Setting the On Timer The On Timer enables you to switch on the air conditioner automatically after a given period of time. You can set the period of time from 30 minutes to 24 hours. 1 To set the operating time, press the ON TIMER button one or more times until the required time is displayed. Possible time is between 0.5 hour and 24 hour inclusive. 2 Press the (Set/Cancel) button to complete the setting. Result: The remaining time is displayed. Blinking of the timer indicator stops. The selected mode and the temperature on the display disappear after 10 seconds. The air conditioner will switch on automatically when the counter displayed on the remote control reaches the set time and disappears the On timer setting. 3 To select an operating mode in advance, press the button until the desired mode is displayed at the top of the remote control. Result: The air conditioner will run in the selected mode when it is turned on. To Cancel the On Timer 1 To cancel the On Timer, press the ON TIMER bu...
Este manual também é adequado para os modelos :Aparelhos de ar condicionado - AQ07A1ME (1.31 mb)
Aparelhos de ar condicionado - AQ07A2ME (1.31 mb)
Aparelhos de ar condicionado - AQ07A3ME (1.31 mb)
Aparelhos de ar condicionado - AQ07A5ME (1.31 mb)