Assessments - 3, GPA: 3.3
(
)
)
|
por este dispositivo também tem outras instruções :
Aparelhos de ar condicionado - AQ07PGGE (6.23 mb)
Facilidade de uso
You must insert or replace the remote control batteries when : You purchase the air conditioner The remote control does not work correctly Notte E-8 Selecting the Automatic Operating Mode E-9 ENGLISH You can start the air conditioner in Automatic mode from your remote control. In the Automatic mode, the optimum temperature and the fan speed is selected automatically. 1 If the is not displayed at the top of the remote control, press the button on the remote control one or more times until it appears. Result: The indoor unit beeps each time you press the button. The air conditioner runs in AUTO mode. 2 You can change modes at any time. If necessary, press the (On/Off) button. Result: The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps. The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: Plugged in Stopped lt will start up normally after three minutes. IMPORTANT Notte Cooling Your Room 1 If necessary, press the (On/Off) button. Result: The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps. The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: Plugged in Stopped lt will start up normally after three minutes. IMPORTANT If the is not displayed at the top of the remote control, press the button on the remote control one or more times until it appears. Result: The indoor unit beeps each time you press the button. The air conditioner runs in COOL mode. 2 Notte You can change modes at any time. To adjust the temperature, press the button one or more times until the required temperature is displayed. Possible temperatures are between 18°C and 30°C inclusive. Result: Each time you press the button: - The temperature is adjusted by 1°C - The indoor unit beeps The air conditioner starts cooling, provided that the room temperature is higher than the selected temperature. If the room temperature reaches the set temperature, the air conditioner stops cooling, but the fan is still operating. 3 Select the fan speed by pressing the button one or more times until the required setting is displayed: Automatic (rotated : ) Low Medium High Result: Each time you press the button, the indoor unit beeps. 4 5 To control the direction of the air flow, refer to page 17. You must select the Cool mode if you wish to adjust the: Cooling temperature Fan speed when cooling E-10 Heating Your Room E-11 ENGLISH You must select the Heat mode if you wish to adjust the: Heating temperature Fan speed when heating 1 If necessary, press the (On/Off) button. Result: The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps. The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: Plugged in Stopped It will start up normally after three minutes. 2 If the is not displayed at the top of the remote control, press the button on the remote control one or more times until it appears. Result: The indoor unit beeps each time you press the button. The air conditioner runs in HEAT mode. Notte You can change modes at any time. 3 To adjust the temperature, press the button one or more times until the required temperature is displayed. Possible temperatures are between 16°C and 30°C inclusive. Result: Each time you press the button: - The temperature is adjusted by 1°C - The indoor unit beeps The air conditioner starts heating, provided that the room temperature is lower than the desired temperature (selected temperature+3°C). If the room temperature reaches the set temperature, the air conditioner stops heating, but the fan is still operating. 4 Select the fan speed by pressing the button one or more times until the required setting is displayed: Automatic (rotated : ) Low Medium High Result: Each time you press the button, the indoor unit beeps. For the first three to five minutes, the fan operates very slowly until the air has been sufficiently warmed. Once the correct temperature has been reached, the fan is automatically set to the required speed. 5 To control the direction of the air flow, refer to page 17. IMPORTANT Changing the Room Temperature Quickly The Turbo cooling/heating function is used to cool or heat your room as quickly as possible. Examplle : You have just come home and find that the room is very hot. You wish to cool it down as quickly as possible. The Turbo function operates for 30 minutes with the maximum settings before returning automatically to the mode and temperature previously selected. 1 If necessary, press the (On/Off) button. Result: The operatio...
Este manual também é adequado para os modelos :Aparelhos de ar condicionado - AQ09PEGE (6.37 mb)
Aparelhos de ar condicionado - AQ09PGGE (6.37 mb)
Aparelhos de ar condicionado - AQ24P6GEA (6.37 mb)
Aparelhos de ar condicionado - AQT12P4GE/MOC (6.37 mb)