Assessments - 4, GPA: 3.8
(
)
)
|
por este dispositivo também tem outras instruções :
Aparelhos de ar condicionado - AQ12PBGE (1.81 mb)
Facilidade de uso
Possible temperatures are between 26°C and 30°C inclusive. Notte If you want to adjust temperature under 26°C, cancel the Energy saving mode before adjusting the temperature. 6 To control the direction of the air flow, refer to page 17. 5 To select the fan speed, press the button one or more times until the required setting is displayed. E-15 ENGLISH 1 If necessary, press the (On/Off) button. Result: The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps. The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: Plugged in Stopped lt will start up normally after three minutes. IMPORTANT 2 Select COOL mode by pressing the button. Notte You can select the Energy saving mode only in COOL mode. Generating anion E-16 The air conditioner can generate anion with an ionizer in the indoor unit. Since it is an additional function, you can select it any mode, even when the air conditioner is turned off. 1 Press the button. Result: The air conditioner generates anion. The indoor unit beeps. N NNNNo oooot tttte eeee If you press the button during off, the air conditioner will turn on automatically and generate anion in the Fan mode with Low fan speed. 2 If you wish to stop the Anion function, press the button again. Result: The air conditioner is reset automatically to the previous mode, temperature and fan settings. 3 To control the direction of the air flow, refer to page 17. Adjusting the Air Flow Direction Vertically E-17 ENGLISH Depending on the position of the indoor unit on the wall of your room, you can adjust the position of the outer air flow blade on the bottom of the unit, thus increasing the efficiency of the air conditioner. 1 Press the button one or more times as required. Result: The outer blade is adjusted vertically. RECOMMENDATION When... Adjust the blade to face... Cooling Upwards. Heating Downwards. 2 If you want the blade to move up and down automatically when the air conditioner is operating, press the button. Result: The blade move up and down, around the base position set. 3 To stop the blade moving up and down, press the button again. N NNNNo oooot tttte eeee If you switch the air conditioner... Then the blade is... Off Closed completely. On again Set to the initial position powered. Adjusting the Air Flow Direction Horizontally There are two sets of inner air flow blades. Just as the outer air flow blade can be adjusted vertically, the inner blades can be adjusted horizontally. 1 Adjust each set of inner blades to the required position, by pushing or pulling them sideways. Setting the On Timer If you press the button when the Off Timer is set, the Off Timer is also cancelled. Notte The On Timer enables you to switch on the air conditioner automatically after a given period of time. You can set the period of time from 30 minutes to 24 hours. To ...
Este manual também é adequado para os modelos :Aparelhos de ar condicionado - AQ07P8GE/FES (1.51 mb)
Aparelhos de ar condicionado - AQ07P8GE/ROD (1.51 mb)
Aparelhos de ar condicionado - AQ07PBGE (1.51 mb)
Aparelhos de ar condicionado - AQ09P8GE (1.51 mb)