Assessments - 3, GPA: 3.7
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
You wish to cool it down as quickly as possible. The Turbo function operates for 30 minutes with the maximum settings before returning automatically to the mode and temperature previously selected. 1 If necessary, press the (0) (On/Off) button. Result: ♦ The operation indicator on the indoor unit lights up. ♦ The air conditioner starts up in the mode selected when the unit was last used. ♦ The indoor unit beeps. 2 Press the (*=)-) button. Result: ♦ The temperature and fan settings are adjusted automatically. ♦ The air conditioner cools or heats the room as quickly as possible. ♦ After 30 minutes, the air conditioner is reset automatically to the previous mode, temperature and fan settings. But, if you press the (^P-) button in DRY or FAN mode, it will change to AUTO mode automatically. 3 If you wish to stop the Turbo function before the end of the 30-minute period, press the button again. Result: The air conditioner is reset automatically to the previous mode, temperature and fan settings. 4 To control the direction of the air flow, refer to page 17. e-12 Removing Excess Humidity If the atmosphere in your room is very humid or damp, you can remove excess humidity without lowering the room temperature too much. 1 If necessary, press the ))))) (On/Off) button. Result: ♦ The operation indicator on the indoor unit lights up. ♦ The air conditioner starts up in the mode selected when the unit was last used. ♦ The indoor unit beeps. IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: ♦ Plugged in ♦ Stopped It will start up normally after three minutes. 2 If the )) is not displayed at the top of the remote control, press the Mods button on the remote control one or more times until it appears. Mod« Result: ♦ The indoor unit beeps each time you press the Q button. ♦ The air conditioner runs in DRY mode. You can change modes at any time. To adjust the temperature, press the (© i @) button one or more times until the required temperature is displayed. Possible temperatures are between 18°C and 30°C inclusive. Result: ♦ Each time you press the (® i @) button: - The temperature is adjusted by 1°C - The indoor unit beeps ♦ The air conditioner starts removing the excess humidity; the quantity of air is adjusted automatically. 4 To control the direction of the air flow, refer to page 17. 3 ENGLISH Airing Your Room If the atmosphere in your room is stale, you can air the room using the Fan feature. Mode Digital i On/Off o cz> 1 If necessary, press the ))))) (On/Off) button. Result: ♦ The operation indicator on the indoor unit lights up. ♦ The air conditioner starts up in the mode selected when the unit was last used. ♦ The indoor unit beeps. 2 If the <# is not displayed at the top of the remote control, press the button on the remote control one or more times until it appears. Result: ♦ The indoor unit beeps each time you press the ^ button. ♦ The air conditioner runs in FAN mode. ♦ The temperature is set automatically. You can change modes at any time. Select the fan speed by pressing the button one or more times until the required setting is displayed: - Low Medium High Result: Each time you press the button, the indoor unit beeps. 3 4 To control the direction of the air flow, refer to page 17. e-14 Selecting Energy Saving Mode If you wish to save energy when using your air conditioner, select the Energy saving mode with the Energy saving button. 1 If necessary, press the (S) (On/Off) button. Result: ♦ The operation indicator on the indoor unit lights up. ♦ The air conditioner starts up in the mode selected when the unit was last used. ♦ The indoor unit beeps. Important The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: ♦ Plugged in ♦ Stopped lt will start up normally after three minutes. 2 Select COOL mode by pressing the Q button. You can select the Energy saving mode only in COOL mode. 3 Press the Result ^0)( button. ♦ The indoor unit beeps. ♦ The air conditioner runs in the Energy saving mode. ♦ The outer air flow blade moves up and down ♦ To stop the Energy saving mode, press the button again. 4 To adjust the temperature, press the button one or more times until the required temperature is displayed. Possible temperatures are between 26°C and 30°C inclusive. If you want to adjust temperature under 26°C, cancel the Energy saving mode before adjusting the temperature. 5 To select the fan speed, press the (-Q) button one or more times until the required setting is displayed. 6 To control the direction of the air flow, refer to page 17. GLOSAT ENGLISH Generating Anions The air conditioner can generate anions with an ionizer in the indoor unit. Since it is an additional function, you can select it any mode, even when the air conditioner is turned ...
Este manual também é adequado para os modelos :Aparelhos de ar condicionado - AQ18P0GED/AFR (6.48 mb)
Aparelhos de ar condicionado - AQ18P0GED5/UPA (6.48 mb)
Aparelhos de ar condicionado - AQ24P6GED5/UPA (6.48 mb)
Aparelhos de ar condicionado - AQ24P6GED6/SAR (6.48 mb)