The time increases or screen the first time the appliance is decreases by one minute each time one of connected to the mains electricity supply. these keys is pressed. Keep the key 0:00 flashes by default. pressed in to increase or decrease the o To set the time, it is necessary to turn the minutes more quickly. appliance on by pressing the "On" key . If you take more than 10 seconds to perform the next operation during programming / setting the clock on your appliance, the screen automatically

The symbol disappears from the screen and the filter is operational again. Installing the double active filter: . Remove the basic filter from the appliance, Fig. 20. . Change the double active filter inside the basic filter for a new one as shown in Fig. 21. . Install the assembly onto the appliance by lining the lower studs up with the slots on the front casing of the appliance and pressing the top clip in until it clicks into position. The assembly is fitted properly when it clicks into posit

The appliance stops working when this happens. The symbol also appears and the appliance beeps when the removable tank is not properly fitted into its housing. • In both events, it is necessary to extract the tank and pour the water carefully down the nearest drain. Dehumidification in continuous mode: • Place a receptacle at the end of the water drainage pipe to collect the condensed water or lead the pipe to the nearest drain. • Remove the plug from the water drainage pipe on the back at the b