Assessments - 2, GPA: 3.5
(
)
)
|
Facilidade de uso
Safety information Risk of electrocution! • Connect the appliance only to wall sockets supplying the current strength detailed on the model plate. Under no circumstances may the appliance be submersed in fluids or fluids be allowed to permeate the housing. Do not expose the appliance to humidity and do not use it outdoors. Should liquids enter the housing, unplug the appliance from the power source immediately and arrange for it to be repaired by a qualified technician. • Do not use the appliance outdoors. Never use the appliance near water, particularly not near sinks, baths or other vessels. The proximity of moisture presents a risk, even when the appliance is switched off. After use, always remove the plug from the power socket. As additional protection, the installation of a faulty-current protection unit with an activation power rating of not more than 30 mA is recommended for the power circuit in the bathroom. Ask your electrician for advice. • In the event of operating malfunctions and before cleaning the appliance, remove the power plug from the wall socket. • Always remove the power cable from the socket by pulling on the plug, NOT on the power cable. • Do not wrap the power cable around the appliance and protect it from being damaged. • The power cable on this appliance cannot be replaced. In the event of it being damaged the whole appliance must be disposed of. • Do not pinch or squeeze the power cable and lay it in such a way that no one can tread on or trip over it. • In order that you can disconnect the appliance quickly in an emergency, do not use extension cables. • NEVER grasp the appliance, the power cable or the power plug with wet hands. • Unplug the appliance immediately after use. Only when you unplug the appliance from the mains supply is it completely free from electricity. Risk of burns and physical injuries • This appliance is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used. Children should be supervised to ensure that they do not play with the appliance. • NEVER leave a switched on appliance unsupervised. • Do not place the appliance close to sources of heat and protect the power cable from damage. • Do not operate the appliance if it has fallen or is damaged. Arrange for the appliance to be checked and, if necessary, repaired by qualified technicians. • Do not open the housing or attempt to repair the appliance yourself. Should you do so, the safety concept of the appliance may be compromised and the warranty becomes void. Permit only authorised technicians to repair a defective appliance if repairs should be necessary. - 1 • The appliance becomes hot during use. Hold it only by the grip when it is hot. Intended use The Hair Straightener is intended for the smoothing and shaping of human hair only, under no circumstances may it to be used for wigs and hairpieces made of synthetic material. The Hair Straightener is intended for domestic use only. Pay heed to all of the information in this operating manual, especially the safety instructions. Items supplied • Hair Straighteners • Operating Instructions Technical data Mains voltage: 220–240 V ~ 50 Hz Power consumption, max.: 75 W Protection class: II / Appliance description 1 Locking device 2 Hotplates 3 Control lamp 4 Heat level dial 5 On/Off switch 6 Suspension loop Before straightening • The hair should be clean, dry and free of styling products. Excepted are the special products that support a straightening of the hair. • Comb the hair thoroughly before straightening so that there are no knots in it. • To achieve an especially good straightening result, spread special products for hair straightening through the hair. • Divide the hair into manageable portions and secure the upper portions to the head with grips so that they do not get in the way. Operation Preparation Note: The hotplates 2must be free from contamina- tion of all kinds. If necessary, clean them before taking the appliance into use (see chapter "Cleaning"). The appliance is locked, the locking device 1has been pushed into the position . 1. Insert the power plug into a wall socket. 2. Slide the On/Off switch 5 to the position I. The control lamp 3 glows. The hotplates 2 are being warmed up. 3. Set the required temperature with the heat level dial 4: • 1 - 2, minimum heat level, for very fine hair. • 2 - 3, low heat level, for fine hair. • 3 - 4, medium heat level, for normal hair. • 4 - 5, highest heat level, for thick or difficult to shape hair. - 2 4. Wait for approx. 2 - 3 minutes, until the programmed temperature has been reached. 5. Slide the locking device 1 into the position . Straightening hair • Prepare the hair as described in "Before straightening". • Start with the lower hair sections at the ba...