Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
Other parts may probably not meet the safety requirements. • The appliance is not intended for use by children or other persons without assistance or supervision if their physical, sensory or mental capabilities prevent them from using it safely. Children should be supervised to ensure that they do not play with the appliance. • Consult with your doctor before using the foot spa should you be suffering from vein inflammation, inflamed varicose veins, water retention or rashes on your legs. • Take care if you are not sensitive to heat. You may not realise how hot the foot support plate can get. • Never operate the appliance with blocked air- inlet openings. Take care that the air-inlet openings do not become blocked through dust, hair etc. To avoid damaging the device: • Do not stand in or on the foot spa. Use it only while seated. • Never operate the foot spa for longer than 20 minutes (KB-Time: 20 Min.). The appliance is not meant to be used continuously for long periods. Allow the appliance to cool sufficiently before using it again. • Do not use any foam-producing bath additives. The appropriate bath additives for bubble baths are available from specialised dealers. • Do not fall asleep whilst using the foot spa. • Never operate the appliance whilst you sleep. • Place the function switch to 0 (OFF) before you connect or separate the appliance from the power source. - 2 Intended Use This foot spa is intended for personal, home use. Its function is only to bathe and massage the feet. It is not suitable for any other purpose. It is not intended for use in the medical/ therapeutic or commercial fields. Delivery Items / Appliance Description Function switch Cover Recesses for accessories: foot pad Recesses for massage accessories Water drainage Roller massager Accupressure massager Finger massager 2 Accupressure accessories 2 Roller massage accessories Operating instructions Technical data Rated voltage:......................220 - 240 V ~ 50Hz Rated output:..................................................85 W CO Time: ....................................................20 min. Protection class:................................................II CO Time The CO Time (Continuous Operation Time) details how long an appliance can be operated without the motor overheat-ing and becoming damaged. After the appliance has run for this period it must be switched off until the motor has cooled itself down. Functions of the Foot Spa This foot spa has three functions available which can be used in various combinations: 1. Bubbles: Air emerging from the air-jets provides the formation of air bubbles, which massage the feet pleasently and gently. 2. Heat: The foot pad heats itself and thus provides for a constant water temperature. 3. Massage: The foot accessories with massage nubs create through vibration a pleasant massage effect. Operation Setup Place the foot spa on the floor in front of a chair. Set the function switch to 0 (OFF). Insert the accessories for the foot pads Select the accessories for the foot pad: -Accupressure accessories with nubs for a gentle vibration massage - Roller massage accessories for an additional point massage of the soles Place the accessories in the recesses provided for them in the foot pad. The accessories for the recesses bear the markings „L“ for left and „R“ for right on their reverse side. - 3 Place massage accessories for the middle console Select a massage accessory for the point massage. Roller massager: stimulating rolling massage of the feet for relaxation of the feet. Accupressure massager: for Shiatsu Massage (Asian finger pressure mas-sage) of the feet. Finger massager: for massaging the feet. Simply set the respective massage accessory in the recess of the middle console between both footbeds. Filling with water Danger of an electric shock! • Only fill the water container to the marking „MAX“ (ca. 3l). Otherwise, water could overflow during the foot spa. • First connect the appliance to the power source when you have filled it with water. Fill the water bath with warm or cold water. • Note: The purpose of the heating function is not to heat cold water. It should simply maintain the temperature of the water. You can also use special bath additives. However, do not use any foam-creating bath additives. Switching on Warning! • Do not switch the foot spa on when your feet are in the appliance. Insert the power plug in the socket. Sit comfortably on a chair. But do not put your feet into the water yet! Adjust the switch to the desired combination. You can set the described functions in the following combinations: 2 1 0 3 - Function switch position 0: Appliance switched off - Function switch position 1: Massage + Heat • Note: You can also use these settings as a dry massage, without water in the water container. - Function switch position 2: Massage + Heat + Bubble - Function switch position 3: Heat + Bubble Using the foot spa Now place your feet in th...