If is still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. This unit has a two-wire double-insulated polarized plug USER/MAINTENANCE INSTRUCTIONS 1. Make sure foot bath is unplugged and is in the OFF position. 2. When transporting foot bath, position hands around rubberized handles for most secure grip. 3. Place foot bath on floor, fill foot bath with warm or cold water, and plug into wall outlet. Never plug in or unplug the foot ba

This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If is still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If is still does not fit, contact a qualified

The three most common nail shapes are round, square, or square with rounded edges. 3. Use the Smoothing Disc/Plate to smooth the edges of each nail. Then use the rounded end of the Cuticle Shaper to gently push the cuticles away from the nail plate. If desired, massage lotion or cream into the cuticle to help soften cuticle and promote healthy nails. Unwanted rough or hard skin can be reduced by using the Sapphire Cones and/or a Smoothing Disc. The side of the pointed Sapphire Cone may be used t

Persistent pain could be a symptom of a more serious condition. 5) Never use any foot bath on open wounds, discolored areas, or any area of the body that is swollen, burned, inflamed or where skin eruptions or ulcerated sores are present. 6) This product should never be used by any individual suffering from any ailments that would limit or altogether inhibit the user’s capacity to feel or have any sensation in the body part that the product is being used for. 7) Do not use if you are diabetic, h

2) Do not reach for an appliance that has fallen into water. Unplug immediately. 3) Do not use while bathing or in a shower. 4) Do not place or store appliance where it can fall or be pulled into a tub or sink. Do not place or drop into water or other liquid. WARNING– To reduce the risk of burns, fire, electric shock, or injury to persons: 1) An appliance should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting on or taking off parts. 2) Do not oper

Always unplug this appliance immediately after using. 2. Do not use while bathing. 3. Do not place or store appliance where it can fall or be pulled into a tub or sink. 4. Do not place in or drop into water or other liquid. 5. Do not reach for an appliance that has fallen into water. Unplug immediately. WARNING– To reduce the risk of burns, electrocution, fire, or injury to persons: 1. Read all instructions before using the appliance. 2. To protect against electrical hazards, do not use while ba

To make sure the ALCI is functioning properly, perform the following test. The purpose of this test is to allow you to make sure the exclusive water sensing system (ALCI) is working. 1) Plug in appliance and press test button on plug (see diagram below). 2) Appliance will stop working. There will be an audible click and a reset button will pop out. 3) To reset ALCI with the reset button, unit should be unplugged. Then push in reset button, and reinsert plug into outlet. 4) If ALCI is not functio