Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
GENERAL INFORMATION 1.1. INTRODUCTION The user’s manual given by the manufacturer contains necessary information about the machine parts. Each machine operator should read these instructions carefully, and the machine should be operated after fully understanding them. Safe and efficient use of the machine for long term depends on understanding and following the instructions contained in this manual. The technical drawings and details contained in this manual constitute a guide for the operator. 1.2. DISTRIBUTOR ATech Machine, Inc. 7609-F Airpark Road – Gaithersburg, MD 20879 USA Phone: +1-301-556-9789 Toll Free: 1-866-80A-TECH Fax: +1-301-542-0140 Website: E-mail: info@ATechMachine.com In case of any technical problem please contact your nearest ATECH dealer through the above mentioned phone, fax or e-mail address. Technical labels with the model description of the machine are fixed onto the front side of each machine. The machine’s serial number and manufacturing year are stipulated on the technical label. Before using the Libra-04 M Manual Copy Router read the user’s manual. 3 / 19 LIBRA-04 M MANUAL COPY ROUTER II – SAFETY APPLICATION Before operating this equipment, be sure of reading and understanding the safety instructions. The operator may not run the machine without reading this guide. Reading and understanding this user guide is important for hindering to injury to the operator, third persons, animals, environment and/or damage to the machine. II.1 – DESCRIPTION OF SYMBOLS USED IN THIS USER’S MANUAL This symbol express the definitions to give some information about the machine. This symbol express that machine does not be operated without reading the user guide. This express that security conditions that must be followed to prevent possible damage to the machine. In this technical manual all information which effect your safety are marked with this warning symbol. Caution! The caution symbol is always used when there is danger of injury to persons. This is hazardous voltage symbol. Thisisgeneralwarningsymbol.Thisrulesmustbeobeyed. This shows that attitudes should not be done without being expert. This symbol indicates that there is a pinch point. This explains the processes that should be done before maintenance. 4 / 19 LIBRA-04 M MANUAL COPY ROUTER This explains not be pulled up the protective parts. Do not operate without guards. This is high temperature symbol. II.2 – SAFETY INSTRUCTIONS Before operating this equipment, read the safety instructions and carry out them. This technical handbook should be accessible at all times at the site of operation of the machine. The operators who work during the installation, should read the machine guide. Be sure of understanding. User should not intervene to the machine if occurs any failure. Only expert should repair the machine. Machine and parts should be protected from the all external defects. Check for proper oil level before operating machine. If it is insufficient, add up. Do not stay under machine during loading and discharge. Never use the machine without grounding. Machine grounding should be made for two different coupling. 1-) Normal machine grounding. 2-) PLC grounding. While machine is run or set up for angular cuts, be careful about pinching your hand to clamping pistons. When transmission parts of machine abrade, they should be replaced with new ones. 5 / 19 LIBRA-04 M MANUAL COPY ROUTER Use only original spare part. Don’t lean against control panel and do not force. Use e-Stop button when necessary for stopping the machine because very frequent repetition of this process, may cause problems on the some electric components. Service personnel of our company is responsible from the first operation of machine. Do not allowed to run the machine any other person. In the event of the machine failure, if there is a problem about electric, electric panel should be opened by experts and again eliminated the problem by them. Do not operate the machine except intended purpose. Don’t touch the cables which are in the machine. Do not wear clothes that hamper manufacturing and endanger the human safety while the operator run machine. Never operate the machine when you get alcohol or drug. While machine is running, don’t make repairs, adjustments and maintenance. Never remove protective machine parts on the machines. Do not forget that such protective machine parts are put in order to protect your security. Never touch the heaters of machine. Only one person should operate the machine. Before the machine stops don’t open the safety covers. 6 / 19 LIBRA-04 M MANUAL COPY ROUTER Disconnect electrical power hydraulic and air pressure before making repairs or adjustments. Do not run the machine in the watery and moist areas. Machine should be adjusted and well-kept all the time. Never do not work with broken machine. 7 / 19 LIBRA-04 M MANUAL COPY ROUTER III –MACHINE DESCRIPTION LIBRA-04 M Manual Copy Router is used for milling lock holes, ...