TILLER • Clean entire tiller (See “CLEANING” in the Maintenance section of this manual). • Inspect and replace belts, if nec es sary (See belt replace ment in struc tions in the Service and Ad just ments section of this manual). • Lubricate as shown in the Maintenance section of this manual. • Ensure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, break age and wear. Replace if necessary. • Touch up all rusted or chipped paint surfaces; sand lightly before

• Never pick up or carry a machine while the engine is running. • Stop the engine: - whenever you leave the machine and before re fu el ling. • Reduce the throttle setting during engine shut down and, if the engine is provided with a shut-off valve, turn the fuel off at the conclusion of working. MAINTENANCE AND STORAGE • Keep all nuts, bolts and screws tight to ensure the equipment is in safe working con di tion. • Never store the equipment with petrol in the tank inside a building where fumes

3. With engine level, remove engine oil fill er plug. 4. Engine oil should be at "FULL" line on dipstick. If low, fill to "FULL" line. For approximate capacity, see "PRODUCT SPECIFICATIONS" on page 3 of this manual. 5. Reinstall engine oil filler plug. 6. Check oil before each use. Add oil if needed. CAUTION: DO NOT overfill engine with oil, or it will smoke heavily from the muffler on startup. • For cold weather operation you should change oil for easier starting (See “OIL VISCOSITY CHART” in t

Sie diese verstehen, bevor Sie die Maschine in Betrieb nehmen. Manuel d’instructions Merci de lire tres attentivement le manuel d'instructions. Assurez-vous d'avoir tout compris avant d'utiliser ce tracteur. Manual de las instrucciones Por favor lea cuidadosamente y comprenda estas intrucciones an tes de usar esta maquina. Manuale di istruzioni Prima di utilizzare la macchina leggete queste istruzioni con attenzione ed accertatevi di averle comprese bene. Instructieboekje Lees deze instructies a

Prevent fires! Keep the engine free of grass, leaves, spilled oil, or fuel. Re move fuel from tank before tipping unit for maintenance. Clean muffler area of all grass, dirt, and debris. Do not touch hot muffler or cylinder fins as contact may cause burns. ENGINE LUBRICATION Use only high quality detergent oil rated with API service classification SG-SL. Select the oil’s SAE vis cos i ty grade according to your expected temperature. NOTE: Although multi-viscosity oils (5W-30, 10W-30, etc.) impro