Assessments - 2, GPA: 5 ( )

Fabricante : Bosch Arquivo Tamanho: 20.42 mb Arquivo Nome : Bosch-MCM_41-MCM_42-Pdf-Rus.Pdf Língua de Ensino:

И , grip 1O Robert Bosch Hausgeräte GmbH Preparation • Place the base unit on a smooth, clean surface. • Pull cord out of the cord store to the required length. • Insert the mains plug. • Keep the accessories drawer closed while working with the appliance. Important information - Use only the rotary switch to switch the appliance on or off. Never switch the appliance off by rotating the bowl, the blender or a tool. - Do not switch the appliance on unless tools or accessories have been completely attached. Bowl with accessories/tools A Risk of injury from the rotating tools! While the appliance is operating, keep fingers clear of the mixing bowl. Always use the pusher (7a) for adding ingredients. After switching off, the drive continues for a short time. Change tools only when the appliance is at a standstill. A Warning! When working with the bowl, the appliance cannot be switched on until the bowl has been attached and the lid has been attached and screwed on tight. Universal blade (9a) For cutting, chopping and stirring. A Risk of injury from sharp blades! Grip the universal blade by the edge of the plastic handle only. When not in use, always put the universal blade back into the accessories drawer. Whipping (Beating) disc (9b) for cream, egg white, mayonnaise. Kneading hook (9c) for kneading dough and mixing-in ingredients that ought not be cut (e.g. raisins and chocolate chips). en Fig. 0 • Attach the bowl (arrow on bowl on dot on the appliance) and rotate as far as possible in a clockwise direction. • Press the drive shaft into the tool holder until it locks into position. • Inserting tools: - Insert tool holder into the bowl. - Insert universal blade, whisking disc or kneading hook into the tool holder and release. A Warning! Add ingredients to be processed always after the tool has been inserted. • Add ingredients. • Attach lid with pusher (match arrow on lid to arrow on bowl) and rotate in a clockwise direction. Lid lug must be located fully in the slot in the bowl handle. • Set the rotary switch to the desired setting. • To add more ingredients, set the rotary switch to 0/off. • Remove the pusher and add ingredients through the feed tube. • Add liquids through the pusher. Pusher insert can be used as a measuring jug. Cutting attachments (10a-10d) A Risk of injury from sharp blades! Exercise particular caution when handling the attachmentsI Note shape and location of the insert when inserting it into the carrier disc. Take hold of carrier disc or chipper disc by the designated recessed grips only. Slicing attachment - coarse (A) Set rotary switch to low speed for slicing: cucumbers, carrots. Slicing attachment - fine (B) Set rotary switch to high speed for slicing: cucumbers, carrots. Shredding attachment - coarse (C) Set rotary switch to high speed for grating: apples, carrots, cheese, cabbage. Shredding attachment - fine (D) Set rotary switch to high speed for grating: carrots, cheese. Robert Bosch Hausgeräte GmbH 1З en Chipper disc (E) for slicing French fries (chips) and fruit salad ingredients. Warning! The chipper disc is not suitable for processing hard cheese, nuts, horseradish and similar foods. Fig. 0 • Attach the bowl (arrow on bowl on dot on the appliance) and rotate as far as possible in a clockwise direction. • Insert drive shaft into the bowl. Depending on the required use: • Insert the required insert into the carrier disc. Note the form and the location (Fig. 0-5a)! • Attach the carrier disc to the drive shaft. or: • Attach chipper disc to the drive shaft. Attach lid with pusher (match arrow on lid to arrow on bowl) and rotate in a clockwise direction. Lid lug must be located fully in the slot in the bowl handle. A Risk of injury from sharp blades! Do not put Ungers in the feed tube. Only use the pusher when adding more ingredients. • Set the rotary switch to the desired setting. • Fill with contents which are to be sliced or shredded. • When adding contents which are to be sliced or shredded, apply only light pressure to the pusher. • Remove the pusher and add ingredients through the feed tube. • Add long and thin contents using the pusher. Warning! Empty the bowl before it becomes so full that the sliced or grated contents reach the carrier disc or the chipper disc. Citrus press (12) Fig. Q for pressing the juice out of citrus frits, e.g. oranges, grapefruits, lemons. • Attach the bowl (arrow on bowl on dot on the appliance) and rotate as far as possible in a clockwise direction. • Insert drive shaft into the bowl. • Attach the citrus press to the drive shaft (arrow on citrus press on arrow on the bowl) and rotate in a clockwise direction. The lug on the filter basket must be located fully in the slot in the bowl handle. • Attach and press on pressing cone. • To extract juice from the fruit, set the rotary switch to low speed and press the fruit onto the pressing cone. Warning! Note...

Baixe o seu

Para fazer o download, introduza 2 dígitos :