Assessments - 6, GPA: 4.7 ( )

Fabricante : Bosch Arquivo Tamanho: 7.47 mb Arquivo Nome : Bosch-MCM_551-MCM_552-Pdf-Rus.Pdf Língua de Ensino:

Place disc onto the disc carrier such that the drive couplings on the disc carrier grip into the disc openings. Disc must rest on the lateral lug of the disc carrier. • Lightly rotating, attach disc carrier to the drive axle. A Risk of injury from sharp blades! Do not put fingers in the feed tube. Only use the pusher when adding more ingredients. • Attach lid with pusher (match arrow on lid to arrow on bowl) and rotate in a clockwise direction. Lid lug must be located fully in the slot in the base unit. • Fill with contents which are to be sliced or shredded. Warning! The discs referred to here are not suitable for processing hard cheese, nuts, horseradish and similar etc. Discs suitable for further purposes are available from dealers, see “Extra accessories”. • Set the rotary switch to the desired setting. • When adding contents which are to be sliced or shredded, apply only light pressure to the pusher. • To add more ingredients, set the rotary switch to 0/off. • Remove the pusher and add ingredients through the feed tube. • Add long and thin contents using the pusher. Warning! Empty the bowl before it becomes so full that the cutting or grating contents reach the disc carrier. For some models: Citrus press (6h) Figure F for pressing the juice out of citrus fruits, e.g. oranges, grapefruits, lemons. Warning! Before operating the appliance, close the blender drive cover (2). • Attach the citrus press and rotate in a clockwise direction. The lug on the filter basket must be located fully in the slot in the base unit. • Attach and press on pressing cone. • To extract juice from the fruit, set the rotary switch to setting 1 and press the fruit onto the pressing cone. • After using the citrus press, unscrew the citrus press and remove the bowl. Robert Bosch Hausgeräte GmbH 9 en Warning! Check the level. Empty the bowl before the juice reaches the filter basket. After using the appliance • Set the rotary switch to 0/off. • Pull out the mains plug. • Rotate the lid in an anti-clockwise direction and remove. • Remove tool: - Take tool holder together with multifunction blade, whisking disc or kneading hook out of the bowl. Remove multi-function blade, whisking disc or kneading hook from the tool holder. After cleaning the multi function blade, affix the blade protectors. - Lift the tool holder on the recesses from the bowl. Take out discs. • Rotate the bowl in an anti-clockwise direction and remove. • Clean all parts, see “Cleaning and servicing”. Blender Figure G • Open blender drive cover. Additionally lift rear up and at the front fold up. • Attach the blender jug (match arrow on the jug to the arrow on the appliance) and rotate as far as possible in a clockwise direction. • Add ingredients. Maximum capacity - liquid = 1.5 litres (frothing or hot liquids max. 0.5 litres). Optimal processing capacity - solids = 100 g. • Attach lid and rotate in a clockwise direction. Lid lug must be located fully in the slot in the blender handle. • Set the rotary switch to the desired setting. • To add more ingredients, set the rotary switch to 0/off. • Remove the lid and add ingredients or • remove the funnel and gradually add solid ingredients through the feed tube or • pour liquid through the funnel. After blending • Set the rotary switch to 0/off. • Rotate the blender in an anti-clockwise direction and remove. • Rotate the lid in an anti-clockwise direction and remove. Tip: It is recommended to clean the blender after use see “Cleaning and servicing”. Cleaning and servicing A Risk of injury from sharp blades rotating drive! Never place fingers in the attached blender! Blender will not operate until the lid has been screwed on tight. Do not remove / attach the blender until the drive is at a standstill. A Risk of scalding! If processing hot liquids, steam escapes through the funnel in the lid. Add a max. 0.5 litres of hot or frothing liquid. A Risk of electric shock! Never immerse the base unit in water or place under running water. Warning! Blender may be damaged. Do not process deep-frozen ingredients (except ice cubes). Do not operate when empty. Blending Warning! To operate the blender, the blender lid and bowl must be attached and screwed on tight with the lid. Take the tools out of the bowl! Warning! Surfaces may be damaged. Do not use abrasive cleaning agents. Cleaning the base unit • Pull out the mains plug. • Wipe the base unit with a damp cloth. If required, use a little washing-up liquid. • Then dry the base unit. 1O Robert Bosch Hausgeräte GmbH en Cleaning the bowl and accessories All parts are dishwasher-safe. Do not wedge plastic parts in the dishwasher as they could warp. The plastic parts may become discoloured, for example if processing carrots and red cabbage, and can be removed with a few drops of cooking oil. Cleaning the blender It is recommended to clean the blender immediately after use. This will prevent residue ...

Baixe o seu

Para fazer o download, introduza 2 dígitos :