Assessments - 2, GPA: 4 ( )

Fabricante : Linear Arquivo Tamanho: 781.02 kb Arquivo Nome : 003d0c4e-1795-4f32-878e-ff86915a6e00.pdf Língua de Ensino:

The operator can still switch from listen to talk manually by pressing “1”, or switch from talk to listen by pressing “3” on a telephone connected to the line (with increased volume). Pressing “8” returns to two-way duplex. Pressing “9” disconnects the call. Press any key but “9” to extend the time 90 seconds. . Check the VOICE PROMPTS ENABLED box to have the Console announce system events with a digitally synthesized human voice. 4.9 SENSORS PURPOSE: To display and edit sensors installed in the Console’s memory. Up to 24 sensors may be installed, each with its own type, restore and supervision options. The status of the sensor selected is also displayed. . NOTE: To display and edit sensors installed in the Console, the sensor data must first be received from the Console (see Section 5.5). USER RESPONSE: SENSOR TYPE . Click on the sensor in the menu tree to view it. . View or edit the SENSOR TYPE. The sensor type options are: NOT INSTALLED: No sensor has been stored in this sensor location. Also can be used to remove a sensor from the Console’s memory. Sensors cannot be added with this menu. HOME AUTOMATION: Sensor will trigger the Console’s home-automation output. EMERGENCY: Sensor will trigger the emergency siren and report the emergency code to the Central Station. POLICE: Sensor will trigger the silent panic alarm and report the police code to the Central Station. FIRE: Sensor will trigger the fire siren and report the fire code to the Central Station. 4.9 SENSORS (CONTINUED) PERIMETER: Sensor will instantly trigger the burglary siren and report the burglary code to the Central Station in Home or Away Mode. Sensor will sound chime in Chime Mode. ENTRY/EXIT: Sensor uses the exit/entry delay and can trigger the burglary siren and report the burglary code to the Central Station in Home or Away mode. Sensor will sound chime in Chime Mode. INTERIOR: Sensor is only active in the Away Mode. It will instantly trigger the burglary siren and report the burglary code to the Central Station if triggered before an entry/exit sensor. Causes a delayed alarm if activated during the entry delay. CHIME: Sensor will sound chime in all modes. ARM/DISARM + HOME AUTO: The left button on a 2-button sensor will arm/disarm the Console.The right button on a 2-button sensor activates the home-automation output. Pressing both buttons triggers the emergency siren. ARM & DISARM: The left button on a 2-button sensor will arm the Console. The right button on a 2-button sensor will disarm the Console. Pressing both buttons triggers the emergency siren. ENVIRONMENTAL: Sensor is always armed in all modes. Causes a local annunciation when triggered. KEYPAD: Reserved for wireless keypads used with the Console. INTERIOR HOME: Sensor allows interior zones to trigger an alarm.This will generally be used with PIRs that are not in normal nighttime mode. SENSOR OPTIONS . View or edit the SENSOR OPTIONS. These options are automatically set when the sensor is programmed into the Console. The sensor options are: AUTO RESTORE: This box should be checked for auto restoring sensors that only send alarm transmissions. The Console will automatically restore the “open” sensor. SUPERVISED: This box should be checked for all sensors that send periodic status reports. DXT sensors do not send periodic status reports. REMOVE THE CHECK FROM THIS BOX IF A MODEL DXT SENSOR HAS BEEN PROGRAMMED INTO THIS SENSOR LOCATION or if you don’t want supervision for that sensor.This will keep the Console TROUBLE indicator from lighting due to missing status reports from that sensor. . NOTE: The sensor can still report a low battery condition this will cause the Console’s BATTERIES indicator to flash. HARDWIRED OPTIONS: For Model DVS-2408 only. Selects which hardwired loop (1-8) is assigned to the sensor number selected. For non-hardwired sensors, this selection should be set to WIRELESS. SENSOR STATUS . View the SENSOR STATUS to see the condition of the sensor selected. The sensor status conditions are: BYPASSED: The Console was armed with this sensor open. It is currently bypassed and cannot cause an alarm. LOW BATTERY: The sensor has sent a low battery signal to the Console. Replace the sensor’s battery. TROUBLE: The Console has not received a status report from this sensor in 8 hours. Sensor may have been out of range of the Console’s receiver, or the sensor may be non-functional. . NOTE: After any changes are made to the sensor type or sensor options, test the sensor to verify proper operation. Testing the “repaired” transmitter will reset the TROUBLE indicator. 4.10 COMMUNICATOR MAIN PURPOSE: For configuring the Console’s communicator format, dialing method, remote access password, dialing delay, and auto answer options. USER RESPONSE: COMMUNICATOR MAIN . Check the ON box to enable the communicator in the Console. . NOTE: You may want to turn the communicator off while testing the system to prevent the Console from trying to dial out when it is not connected to a telep...

Baixe o seu

Para fazer o download, introduza 2 dígitos :